@jimi61271 wrote:
I’m having an outbound issue that I’m unable to resolve. I’m using a Momentum Telecom trunk with outbound authentication and all calls placed from the test extension go to an All Circuits Busy message followed by a Busy signal.
The PBX server is remote. I’ve mirrored a server locally with the SIP trunk information and inbound / outbound works fine. I believe both servers have exactly the same settings but the remote server is behind a Netgate firewall. I did configure the firewall for the suggested settings from Momentum. Also, Inbound does work at the remote site.
I’ve posted a log of an example outbound attempt from the remote server:
https://pastebin.freepbx.org/view/aec88a04
Any help would be most appreciated.
Posts: 1
Participants: 1
