Hi,
My name is Malik Rihan, and I recently upgraded my FreePBX from version 11.13.0 to 18.16.0. On the old version, I had a Dinstar PRI line configured, which worked smoothly without any issues. However, after the upgrade, the SIP trunk configuration is not getting established, and the status shows as fault.
Here’s what I have already tried:
- Checked and updated the Trunk Settings to simple, default settings for easy compatibility.
- Verified the network and connectivity between the FreePBX server and the Dinstar PRI gateway. (Connectivity is happening)
- Tested with basic configurations, but the SIP registration fails, and no calls are going through.
- Firewall and everything disabled for test purpose still same issue
I would appreciate any insights or suggestions to resolve this issue. Please let me know if additional logs or configurations are needed.
Thank you for helping me in this in advance!
2 posts - 2 participants