@snaplink wrote:
I'm currently using FreePBX 12.7.4-1710-2.sng7 and PBX Service Pack 1.0.0.0. I'm also using Sysadmin Pro and Endpoint Manager Pro.
I've created a template for this T46G phone and I've configured the template and DHCP scope for this VLAN and have set option 66 as the FreePBX internal IP address in the scope. I can't link anything to my screen caps because I'm new but I can tell you that in my template config shows the destination address as the Internal IP of the FreePBX server, Provisioning Server Protocol is set to tftp and Provisioning Server Address is set to the internal IP of the FreePBX server.
The phone reboots and grabs a DHCP address just fine. I can ping the phone from the FreePBX command line and I see that there is a .cfg file with the MAC address in /tftpboot/ for this phone. When I type service xinetd status it comes up as active running.
I don't know what else to try here as I'm stumped. I'm not great with linux so if there is something specific anyone needs to see let me know what command to run and I can post the results of that.
Thank you!
Posts: 1
Participants: 1