@dvsatech wrote:
I have a freePBX distro setup. I purchased additional modules like administrator and endpoint. I am running the latest version (14) which is fully updated both modules and system (FreePBX 14.0.1.24) .
I came across a router with WAN, LAN (including PoE), both 2.4 and 5G WiFi and built in 2 port ATA. The router is a Cambium Networks cnPilot R201P. I feel like its the router jackpot (for an ISP) especially at only $120 list. I have only just started playing with it but I really like the features and functionality especially that I can “cloud manage” it from one place. I am an ISP and I provide Internet (and phone via the FreePBX) with most of my clients sitting off of grandstream GXW42xx devices in campus liek environments. Everything works well and I even have fax working (its reliable but not fast). I really like the R201P since it will allow me to plop down a router at the customers end of the connection and let me provide Internet and phone with a single device. It only took a few minutes to program the ATA to get it working on the FreePBX but I had to manually enter the login/password for registration.
How does one go about creating a config file or template for a new device (under endpoint manager) so I can configure the R201P from the FreePBX administration screen like I can on the Grandstream gxw42xx? (for example if I want to add a phone line to the gxw42xx I just enter the MAC, template, and select the account number [equal to the port on the grandstream] in endpoint manager and the grandstream will reboot automatically and everything is fine and conbfigured for that port. This is because the granstream is setup to download the config via TFTP and the FreePBX manages the firmware images. How can I do the same thing with the R201P?
I have done application development in the past including TCP/IP applications but if its not that simple, who can I hire to write it for me?
Posts: 1
Participants: 1