@ttquattroman wrote:
Hi Guys,
I would really appreciate some help.
I have FreePBX running on a Raspberry Pi 3 with counterpath Xlite softphones on all PC’s/Macs (4 in total) Zoiper softphones running on a Iphone and an Android phone all setup as extensions on FreePBX. In addition I have a Yealink cordless phone setup as an extension. Also I have an analogue phone setup as an extension using a Linksys SPA3102. The SPA3102 also provides the interface to my PSTN (copper wire) connection.
The FreePBX trunk is set up as a PJSIP trunk and the SPA3102 Line & PSTN are all showing as “Registered” and the SPA3102 has been setup using the various guides found via Google.
All extensions can call one another, all extension can call out to the PSTN.
My issue is with incoming calls, any incoming caller recieves ringing tone ok, but the ringgroup I have set up on the FreePBX never rings (I have tried setting the destination on the “inbound route” as an extension, but this still does not work.
So I have exhausted all my limited knowledge and would really appreciate some guidance, so any suggestions, hints, tips etc. would be gratefully accepted.
Peter
Posts: 2
Participants: 1