Voicemail Direct Dial Prefix not functioning

@GeekBoy wrote:

This is a fresh setup with only a couple of extensions connected.

In Feature Code admin section I can see it set to an asterisk.
Using Asterisk 15.5.0

Here is the call result.

– Executing [*1000@from-internal:1] Answer(“PJSIP/1001-00003e34”, “”) in new stack
– Executing [*1000@from-internal:2] Macro(“PJSIP/1001-00003e34”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“PJSIP/1001-00003e34”, “TOUCH_MONITOR=1550515101.17142”) in new stack
– Executing [s@macro-user-callerid:2] Set(“PJSIP/1001-00003e34”, “AMPUSER=1001”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“PJSIP/1001-00003e34”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“PJSIP/1001-00003e34”, “1?Set(REALCALLERIDNUM=1001)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“PJSIP/1001-00003e34”, “AMPUSER=1001”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“PJSIP/1001-00003e34”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“PJSIP/1001-00003e34”, “AMPUSERCIDNAME=Test Line”) in new stack
– Executing [s@macro-user-callerid:8] ExecIf(“PJSIP/1001-00003e34”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
– Executing [s@macro-user-callerid:9] GotoIf(“PJSIP/1001-00003e34”, “0?report”) in new stack
– Executing [s@macro-user-callerid:10] Set(“PJSIP/1001-00003e34”, “AMPUSERCID=1001”) in new stack
– Executing [s@macro-user-callerid:11] Set(“PJSIP/1001-00003e34”, “__DIAL_OPTIONS=HhTtr”) in new stack
– Executing [s@macro-user-callerid:12] Set(“PJSIP/1001-00003e34”, “CALLERID(all)=“Test Line” <1001>”) in new stack
– Executing [s@macro-user-callerid:13] GotoIf(“PJSIP/1001-00003e34”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:14] ExecIf(“PJSIP/1001-00003e34”, “0?Set(GROUP(concurrency_limit)=1001)”) in new stack
– Executing [s@macro-user-callerid:15] ExecIf(“PJSIP/1001-00003e34”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:16] NoOp(“PJSIP/1001-00003e34”, “Macro Depth is 1”) in new stack
– Executing [s@macro-user-callerid:17] GotoIf(“PJSIP/1001-00003e34”, “1?report2:macroerror”) in new stack
– Goto (macro-user-callerid,s,18)
– Executing [s@macro-user-callerid:18] GotoIf(“PJSIP/1001-00003e34”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:19] ExecIf(“PJSIP/1001-00003e34”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
– Executing [s@macro-user-callerid:20] Set(“PJSIP/1001-00003e34”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:21] GotoIf(“PJSIP/1001-00003e34”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,37)
– Executing [s@macro-user-callerid:37] Set(“PJSIP/1001-00003e34”, “CALLERID(number)=1001”) in new stack
– Executing [s@macro-user-callerid:38] Set(“PJSIP/1001-00003e34”, “CALLERID(name)=Test Line”) in new stack
– Executing [s@macro-user-callerid:39] GotoIf(“PJSIP/1001-00003e34”, “0?cnum”) in new stack
– Executing [s@macro-user-callerid:40] Set(“PJSIP/1001-00003e34”, “CDR(cnam)=Test Line”) in new stack
– Executing [s@macro-user-callerid:41] Set(“PJSIP/1001-00003e34”, “CDR(cnum)=1001”) in new stack
– Executing [s@macro-user-callerid:42] Set(“PJSIP/1001-00003e34”, “CHANNEL(language)=en”) in new stack
– Executing [*1000@from-internal:3] GotoIf(“PJSIP/1001-00003e34”, “0?from-internal,1”) in new stack
– Executing [*1000@from-internal:4] Goto(“PJSIP/1001-00003e34”, “bad-number,s,1”) in new stack
– Goto (bad-number,s,1)
– Executing [s@bad-number:1] Goto(“PJSIP/1001-00003e34”, “11,1”) in new stack
– Goto (bad-number,11,1)
– Executing [11@bad-number:1] ResetCDR(“PJSIP/1001-00003e34”, “”) in new stack
– Executing [11@bad-number:2] NoCDR(“PJSIP/1001-00003e34”, “”) in new stack
– Executing [11@bad-number:3] Progress(“PJSIP/1001-00003e34”, “”) in new stack
– Executing [11@bad-number:4] Wait(“PJSIP/1001-00003e34”, “1”) in new stack
– Executing [11@bad-number:5] Playback(“PJSIP/1001-00003e34”, “silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer”) in new stack
– <PJSIP/1001-00003e34> Playing ‘silence/1.ulaw’ (language ‘en’)
– <PJSIP/1001-00003e34> Playing ‘cannot-complete-as-dialed.ulaw’ (language ‘en’)
– <PJSIP/1001-00003e34> Playing ‘check-number-dial-again.ulaw’ (language ‘en’)

Posts: 5

Participants: 2

Read full topic