@HypnotiXDMP wrote:
So, from what I can tell, the PBX is not even checking the blacklist (this would be the default one), and just lets the call go right through. Any advice?
FreePBX Version: 15.0.16.44
Asterisk Version: 16.6.2
Blacklist Version: 15.0.2.10Here are the logs for when the call came in (I have put ########## where my number is, but it does show mu number properly).
[2020-04-15 11:42:20] VERBOSE[24623][C-0000080c] pbx.c: Executing [in@sub-record-check:3] ExecIf(“SIP/Vitel-Default-In-00002594”, “10?Set(FROMEXTEN=##########)”) in new stack
[2020-04-15 11:42:20] VERBOSE[24623][C-0000080c] pbx.c: Executing [8506089068@from-trunk:9] ExecIf(“SIP/Vitel-Default-In-00002594”, “0 ?Set(CALLERID(name)=##########)”) in new stack
[2020-04-15 11:42:20] VERBOSE[24623][C-0000080c] pbx.c: Executing [8506089068@from-trunk:21] Set(“SIP/Vitel-Default-In-00002594”, “__CRM_SOURCE=##########”) in new stack
[2020-04-15 11:42:21] VERBOSE[24623][C-0000080c] pbx.c: Executing [s@macro-user-callerid:2] Set(“SIP/Vitel-Default-In-00002594”, “AMPUSER=##########”) in new stack
[2020-04-15 11:42:21] VERBOSE[24623][C-0000080c] pbx.c: Executing [s@macro-user-callerid:9] ExecIf(“SIP/Vitel-Default-In-00002594”, “1?Set(REALCALLERIDNUM=##########)”) in new stack
[2020-04-15 11:42:21] VERBOSE[24623][C-0000080c] pbx.c: Executing [s@macro-user-callerid:43] Set(“SIP/Vitel-Default-In-00002594”, “CALLERID(number)=##########”) in new stack
[2020-04-15 11:42:21] VERBOSE[24623][C-0000080c] pbx.c: Executing [s@macro-user-callerid:47] Set(“SIP/Vitel-Default-In-00002594”, “CDR(cnum)=##########”) in new stack
[2020-04-15 11:42:21] VERBOSE[24623][C-0000080c] pbx.c: Executing [exten@sub-record-check:1] NoOp(“SIP/Vitel-Default-In-00002594”, “Exten Recording Check between ########## and 401”) in new stack
[2020-04-15 11:42:21] VERBOSE[24623][C-0000080c] pbx.c: Executing [s@macro-dial-one:2] Set(“SIP/Vitel-Default-In-00002594”, “__CRM_SOURCE=##########”) in new stack
[2020-04-15 11:42:21] VERBOSE[24623][C-0000080c] pbx.c: Executing [ctset@macro-dial-one:1] Set(“SIP/Vitel-Default-In-00002594”, “DB(CALLTRACE/401)=##########”) in new stack
Posts: 2
Participants: 2