Unable to conference - only from one extension
@jpowell512 wrote: Running FreePBX 13.0.193, Asterisk 13.18.0 I have a single extension that cannot place a 3 way call. We have about 100 Mitel 5212 phones, all the same R8.0.08.00.00.04. The only...
View ArticleCritical System Error
@Ibrahim wrote: Hello everyone, I upgraded my freepbx 12 to freepbx 13 and then 13 to 14. i followed all steps outlined in the wiki and was able to iron all the little issues that come with upgrading...
View ArticleClik here to view.
Caller ID does not come through to Queue Agent on sipek VOIP for C Sharp
@ChristianM wrote: I have set up FreePBX with a queue and an extension over a SIP-VOIP account and it works fine. Except, that on the softphone that I programmed with C Sharp using the SIPEK Voip SDK,...
View ArticleAuto created Peers when activating VPN Server
@fabtre2016 wrote: Hello, I searched and cant find an answer to my question. I have FreePBX version 13.0.192.19. i just recently got a sangoma s500 and wanted to use VPN capabilities. I setup VPN...
View ArticleAll Trunks fail to Register - Timed Out
@seemenc wrote: I’m running FreePBX 14.0.1.31 and have 3 trunks registered to one carrier and 1 trunk to another carrier. Recently after updating modules and performing system updates, I’ve noticed...
View ArticleCalls drop on double call forward
@Vincent2000 wrote: Hi everyone, I’d like to first thank all developers and contributors making FreePBX as awesome as it is. I’ve been using it for many years and it’s been very good to me. I’m...
View ArticleCallout disconnect 6400ms - sip-retransmission
@Ezra5447 wrote: Hi Guys, having weird issue on callout from asterisk when incoming call is working fine. tried to follow with the sip transmission web link but not so sure about the solutions as the...
View ArticleLet’s encrypt certificate generation fails to run (Freepbx 13)
@RZ1 wrote: Hi, I get a certificate generation error: There was an error updating the certificate: Error ‘Requested host ‘FQDN’ does not resolve to ‘80.XXX.XXX.XXX’ (Found FQDN)’ when requesting...
View Article401 Unauthorized when trying to connect extension with softphone
@abdussamiul wrote: Hello, I am a new noob here. I have installed and configured my PBX and also added SIP Extensions. But when I am trying to connect my extension using softphone [I don’t have...
View ArticleTo make the webhook when any incoming call per trunk.
@vntivanov wrote: Good afternoon. Is it possible with standard tools Freepbx to make webhook with callerid(curl && get || wget) when any incoming call per trunk? If not, what do we need...
View ArticleClik here to view.
Trunk PJSIP Advanced Settings Duplicates
@tony722 wrote: On my PJSIP trunks, a few of the Advanced PJSIP settings are duplicated in the UI. For example, RTP Symmetric is 2x and Rewrite Contact is there 2x too. It’s really weird trying to use...
View ArticlePBX migration asterix freepbx
@DavidPX wrote: At our buissness we have to migrate our PBX to a new server. We want exacly the same config. We have now an old asterix distro without any gui. The compagny that support us estimate a...
View ArticleClik here to view.
UCP crashes upon login when SMS is enabled
@HaruSoul wrote: Just got going with SIPStation earlier this week and was trying to test the SMS and the UCP errors out. error.png1877x939 63.7 KB Posts: 1 Participants: 1 Read full topic
View ArticlePaging Pro Question
@tishriclarin wrote: Hi, I would like to ask if paging pro module can play music on a idle group of paging destination. We wanted to play music while there are no paging activity are broadcasted yet....
View ArticleFritzbox extension as trunk
@zlotowinfo wrote: i wish to add frizbox extension as trunk on my pbx but it not works, i have external extensions enabled on fritz i found csipsimple on android only this software connect good to...
View ArticleClik here to view.
Call ID Anonymous from Vega 50 GW, Dial Plan not working
@SimianScott wrote: Hello everyone. I am having a issue with fixing the caller ID being sent to my PBXACT server from my Vega 50 GW device. We are currently running 3 FXO pots lines for our service...
View ArticleConfigure FXS extension to use Bogen ADP1 door phone
@foxsmercantile wrote: Which drop down menus do I have to use and what do I have to do to get door phone to automatically dial a group of extensions when you push the call button? Posts: 7...
View ArticleCustom Backup / Restore
@MIKEK wrote: I added a directory to the daily backup. Works fine. When I tried to restore, he gave a error message for every file in the directory and told me that the file does already exist. The...
View ArticleYum update failing on kmod-forcedeth
@martenrt wrote: Running a yum update this morning, here is the error I receive at the end of the dependency check: Error: Package: sangoma-pbx-1801-3.sng7.noarch (sng-pkgs) Requires: kmod-forcedeth...
View ArticleNew extension unable to make external or internal calls
@simple wrote: Hi, I have setup a new extension on an existing production version of FreePBX V14. The new extension will not make any internal or outbound calls but will take inbound calls fine. I...
View Article