Call Forward To Multiple External Numbers
@risaw1981 wrote: Hi Everyone My names Darren and I come from a 3CX background and have been playing with the FreePBX now for a few days, must say I love it! Ive purchased the System Admin module as I...
View ArticleRing Group behavior with off hook extension
@imorton wrote: I have a 3 extension ring group using “firstnotonphone” strategy. It works great, unless the first extension is off hook. Then caller always hears a busy signal. If the first extension...
View ArticleProvision polycom IP335
@kyiu wrote: I’m running FreePBX 14.0.1.36 ‘VoIP Server’. It’s a brand new installation on a VM. I’ve purchased the EPM to provision some Polycom IP 335 phones. The phones have been factory reset....
View ArticleUpgrade from 13 to 14
@risaw1981 wrote: Hello you wonderful people, I have a quick search around but was wondering if there is a reliable link to upgrading from FreePBX 13 to 14 as the link provided within the GUI is...
View ArticleSipgate setting
@Kbtang88 wrote: has anyone have updated sipgate uk setting… I’m not sure mine is right because I have it connected but doesn’t receive phone call through ring group. it’s say registrated it’s was...
View ArticleReload failed because retrieve_conf encountered an error: 1
@Kbtang88 wrote: how can i fix this…? exit: 1 PDOException: SQLSTATE[42S22]: Column not found: 1054 Unknown column ‘calendar_enable’ in ‘field list’ in file...
View ArticleSuddenly can't dial out
@abcym15 wrote: Hello, I have had a FreePBX install (14.0.1.19) running for 2 months connected to a Grandstream GXW4104. Inbound and outbound calling have been working fine until today, when all of a...
View ArticleFreePBX on LXC w/ Commerical module support
@syadnom wrote: I’ve done my due dilligence in searching for this and found a number of similar posts in the forums and in the wiki. Most notably this one:...
View ArticleClik here to view.
Distro stuck at booting when no internet connection
@dotcom wrote: Hi All, When our Distro has no internet connectivity, the boot process is stuck at “Starting Asterisk”. How can we set a timeout on this so the OS can finish the boot process?...
View ArticleClik here to view.
View not allowed:: PHP exceptions
@subarutelescope wrote: Screen Shot 2018-03-26 at 8.32.27 AM.png2632x1560 412 KB After installation, opening webpage generates view not allowed:: and PHP exceptions. Posts: 5 Participants: 3 Read full...
View ArticleClik here to view.
Inbound Route DID Number não permite palavras
@jrfreitas wrote: Boa tarde, Possuímos Gateway SIP Aligera FXS/FXO com entroncamento SIP Trunk, na versão 12 do freepbx eu conseguia configurar o Inbound Route com nomes por exemplo: FXO01, FXO02 e...
View ArticleOne time condition multiple phones
@tgross wrote: I have a situation where we need to have a whole block of phones behave differently based upon the time condition. Specifically these are phones in the classrooms at a school. During...
View ArticleCodec Translation
@Ezra5447 wrote: Hi guys, i have a telephony system that using only alaw/g711a(because for that system we only have license for that codec) the problem im having is my trunk provider has suddenly...
View ArticleBackup templates not working
@lprotti wrote: Hello, trying to setup a warm spare server using this procedure At the point where I drag the backup templates in the items window, I get 8 items (2 mysql, 1 asterisk db and 5...
View ArticleClik here to view.
Call Event Logging Report / Report
@sofyane wrote: Hello, in the Call Event Logging Report Tab ,When i select a call and check the details , the TimeStamp seems to be different to the Time of the Call (+1 hour). in this example you see...
View Article[FreePBX13] Module updates creates unmet dependencies: sysadmin 13.0.76.1 and...
@ngingras wrote: Running module updates on FreePBX 13 systems is currently creating unmet dependencies for sysadmin 13.0.76.1 and framework 13.0.194.5, which is causing endpoint, callerid, and...
View Articlecallback time after switching to GSM
@Pletev wrote: Hello, please someone who sets up on FreePbx: callback time after switching to GSM, for example. Now it’s about 10 seconds and I need to change it to 30 or turn it off. Thank you Pletev...
View ArticleFirewalld and iptables
@antonis77 wrote: Can we use both in Freepbx ? Because i want to know if i make any change with the iptables command will it affct also the firewalld and vice versa if i make any change with...
View ArticleDisable Intercom Beep
@abeauchamp wrote: I have a Paging Group defined. When I intercom a paging group I want the beep disabled. I have announcement disabled globally, in the paging group, and the courtesy tone for all...
View ArticleUCP showing Operator for all users
@brianhess wrote: In the User Manager Group tab I am trying to remove the Operator as an option under the UCP tabs. When I submit it just re-adds it. I would only want the operator to be viewed by a...
View Article