Grandstream and Call Forward
@cfapress wrote: On my Grandstream gxp2130 I can use the built-in softkeys to turn on/off call forwarding and a little icon appears on the screen indicating the on/off status. When using the Asterisk...
View ArticleCall Leg Extension does not exist
@etgllc wrote: I’ve got a strange situation with my outgoing calls. Just last week, users are reporting that some external phone numbers they dial will ring and then it sounds like on the far end is...
View ArticleClik here to view.
Cisco Phone Not Registering
@helpme123 wrote: I’m new to FreePBX and I’m trying to register a Cisco CP-7821 phone (Active Load: sip78xx.10-1-1SR1-4) using a SEPXXXXXXXXXXXX.cnf.xml file (please see below). However, after power...
View ArticleRapid dial list
@nhatton wrote: We have 2 D80 phones that are not pulling the rapid dial list from the phonebook in freepbx. They worked here locally, but when we shipped them to our branch, they no longer pull them....
View ArticleDaynight (Day-Night Mode)
@Gordon0193 wrote: I noticed that under Feature Code Admin it no longer has “Daynight” in version 15 of FreePBX. What is the intended replacement? Thanks, Posts: 4 Participants: 3 Read full topic
View ArticleIssues with 7941G Dialing Out
@papkee wrote: Hi all, I’ve got ten or so cisco phones, of various models, in a little private phone network that has been working well for a few months now. I recently got a new generation of phone,...
View ArticleConference does not apply language pack
@xax wrote: Hello, I’ve downloaded the german language files for my freepbx 14.0.5.25 with asterisk 13 and changed everything to german, but the conference still asks me in english for my pin number....
View ArticleUser Management Zulu Site crashes
@xax wrote: Hello, everytime we go into Administrator -> User Management -> Zulu and set an option the site or whole webserver seem to crash. The settings that were made are saved but the User...
View ArticleTime Zone Reset After Backup
@nybble wrote: PBX-Version 10.13.66-22 Asterisk Version 13.18.3 FreePBX 13.0.195.26 We’re having an unusual problem with our production FreePBX. Ever since switching from Quest RapidRecovery to Backup...
View ArticlePeer '' is now UNREACHABLE!
@mst wrote: Experts, I have noticed it happens sometimes I have phones which are: Peer ‘’ is now UNREACHABLE! It really happens randomly to all phones. I know network is just fine. There must be...
View ArticleEndpoint manager not generating the config file for the phone
@kyiu wrote: FreePBX 14.0.5.25 with EPM 14.0.2.188 (commerical) I’ve been trying to provision bunch of Cisco 7960 phones. I created a template for the model. When I tried to map the extension to the...
View ArticleCalls from certain providers are being blocked
@JuanKB1024 wrote: I have a fresh install of the distro and configured my trunk and extensions according to my trunk provider. But I’ve noticed that the PBX blocks calls from certain mobile providers....
View ArticleT38 setup issue
@Area51 wrote: Hi all. First time trying to get T38 working with a Canon ADV-4545 with the T38 board and although it register to the extension I created just fine, trying to send a t38 fax results in...
View ArticleWierd issue when modifying Caller ID
@wownotown wrote: I am having a weird issue on a new FreePBX installation. Everything has been working well, but when an external number calls into a DID and has a destination of a Misc Destination...
View ArticleFreePBX 14 and Asterisk 13 on Debian 8 Issue
@smw wrote: I have installed a Debian 8 container with FreePBX 14 and Asterisk 13 using the instructions in the WIKI and creating the startup script also from the WIKI for that. The only problem I ran...
View ArticleLogin/Logoff extension Without User&Device Mode
@MarceloDONN wrote: Is it possible to login in a phone without User&Device mode? In a Extension Mode. We want to use any phone with any extension. FreePBX 14.0.5.25 - Asterisk 13.22.0 Phones...
View ArticleTransfer to an external number using a feature code
@gl1tchh wrote: I am trying to set up a feature code for my users that will transfer the channel they are currently connected to, to a specific external number. I currently have the following set up...
View ArticleUpdated to FreePBX 13, Sendmail working, Extension Emails are not
@knotworking wrote: I upgraded my old FreePBX 2.10 (Asterisk 11) to 13, did a system backup, installed a fresh copy of FreePBX 13 + Asterisk 13 on a new drive and restored the backup from the previous...
View ArticlePackage-lock.json altered Security Alert
@edricksmith wrote: Module: “User Control Panel”, File: “/var/www/html/admin/modules/ucp/node/package-lock.json altered” I’ve tried running fwconsole ma refreshsignatures and everytime it finds UCP is...
View ArticleChange in trunk sip settings
@StephanK wrote: I made a change in the sip settings for my sipstation trunk. I am using this since years. However, sipstation itself overwrites my changes every now and then. Is there any way to make...
View Article