Outbound Routes/Carrier Failover
@lababy wrote: I’ve setup the outbound routes and they work correctly, but what I’d like to do is on congestion to try an alternate outbound carrier. So I’ve tried using custom extensions and customer...
View ArticleGetting Music on Receiving Extension (new install v14)
@kulshafer wrote: Hello, Just installed Freepbx 14 and connecting Mitel 5320 phones. Got them to ring between the two test phones, but the receiving extension only hears music after they pick up the...
View Article2 phones, same extension pjsip. Voicemail plays from other phone
@Kafluke wrote: First time setting up two phones on the same extension. PJSIP. Everything working right except for voicemail pickup. When the user attempts to play a voicemail from the phone it...
View ArticleDAHDI delay in outgoing call, then "call cannot be completed as dialed"
@cfapress wrote: I’ve got an unusual issue that happens with our DAHDI trunk. Sometimes, not all the time, outgoing calls take 20-seconds before they ring. Then we get a TelCo message saying “your...
View ArticleFreePBX GUI is unreachable
@helpme123 wrote: I can no longer access the FreePBX GUI, and can no longer SSH into FreePBX using Putty. I keep getting “This site can’t be reached 172.28.18.89 took too long to respond” in my...
View ArticleUCP alternative for checking shared mailbox? UCP uses too much ram
@bittrekker wrote: My hosted PBX only has 2 GB of RAM. Is there an alternative to UCP that does not use as much RAM? FreePBX 13.0.195.19 Asterisk 13.23.1 I recall an old user control panel on PIAF...
View ArticleConference Dropping any caller over 2 or 3
@MrEllipsis wrote: I’ve set up a conference line with its own DID and Extension. This is FreePBX Conference. Not pro. The room works as expected until the 3rd or 4th caller tries to join. They...
View ArticleHow to implement BLF
@JDEC01 wrote: Hello, I included in res_digium_phone_devices.conf the following 3 lines: contact=contacts-internal.xml blf_items=myBlfFile.xml blf_contact_group=PBX Directory My Digium D50 manages to...
View ArticleInteresting new success with Chan-SCCP-B and SCCP-Manager (both from GitHub)
@cynjut wrote: As many of you know, I’ve proudly been running my home on PIAF Gold for something like 12 years. I ran it on the 32-bit Asterisk 1.8 because, at the time, Chan-SCCP-B needed a 32-bit...
View ArticleFreePBX and Cisco 7945
@TasosNi wrote: I have FreePBX 14.0.5.25 and try to connect a 7945G cisco ip phone (old but gold) I am looking for the correct xml and what else does tftp want …? I searched the web and I have not...
View ArticleClik here to view.
Blacklist Problems
@danlane1509 wrote: Here’s what I have, newish install of freepbx (I actually reinstalled this recently from scratch) Reset everything up. I did not reimport my old blacklists. So right now I have 2...
View ArticleFree PBX ran out of disk space - How to extend the partition and file system
@crimsonbadger wrote: I’ve written this to hopefully save some time for you hard working, under-rated network techs, so read on :- Symptoms – My New FreePBX 14.0 distro test installation – the...
View ArticleNo audio on internal calls
@volkswagner wrote: Greetings, I’m not able to get my NAT settings and firewall setup correctly. I’m running FPBX-14.0.5.25(13.22.0), Distro behind MikroTik router. I have Ports 10000-2000 forwarded...
View ArticleOutbound routes for FAX
@mst wrote: Experts, I have clarityel provider and looks like they block option to allow ANY CID on the trunk. Currently I have Force TRUNK CID. The problem is I would like to use other number than in...
View ArticleFreePBX 14.0.5.25 it's free recording?
@hunterman wrote: Hello everyone, Please can any one tell me if the call recording can i make free recording call, My FreePBX 14.0.5.25 THANKS Posts: 1 Participants: 1 Read full topic
View ArticleNew Alert-Info format disrupts distinctive ringtone on some phones
@macpip wrote: Short story: Alert-Info header format changed from Alert-Info: foo to Alert-Info: <http://127.0.0.1>;info=foo this way it’s no more compatible with some phones. Temporary solved...
View ArticleClik here to view.
Pihole overwrote freePBX web gui
@averythomas wrote: Hello, I am running pi-hole and freePBX on the same server. It looks like the pi-hole decided to overwrite the freepbx webgui directory during the install. I can’t change the...
View ArticleVoicemail options not syncing with imported CSV
@Reezy89 wrote: I am importing voicemail options over from one server to another. using the format below with the pipe delimiters attach=no|saycid=no|envelope=no|delete=no after importing the csv to...
View ArticleClik here to view.
Extension will not register when on a 192.168.1.0 subnet
@freepbxuser42 wrote: Hi, I have got a really strange issue that I cant seem to figure out, I first encountered this issue when I restored a backup to a server on a different subnet. The backup had...
View ArticleClik here to view.
Error when uploading background image
@okynnor1 wrote: Hi, I tried to upload a new background image. I was confronted with the following attached error. How could I go about to fix this? Whoops \ Exception \ ErrorException (E_WARNING)...
View Article
