Call Event Logging detailed report changes
@RDCCal wrote: After upgrading to 13.0.26.7, the report layout has changed. On previous versions, it displayed the details in the report window, which we used to track which extension answered calls,...
View ArticleGetting Wrong Password Error using Polycom IP 5000 in FreePBX
@Radesh wrote: Lost access to the Polycom IP 5000 so had to do a password reset. Unfortunately this removed the configuration from the phone. The phone is pulling everything from Endpoint Manager...
View ArticleNon Blocking CID Lookup
@japayton42 wrote: Is it possible to have Caller ID Lookups happen in the background during a call. I want to pull CID from my CRM but in case things are running slow I don’t need the CID until after...
View ArticleTwilio Trunk / FreePBX / Can't Hear Other Party
@jeffm wrote: So I have a Twilio trunk and when I call out from my Poylcom phone it rings, the other party answers but neither of us can hear each other. If I look at the recording in the Twilio admin...
View ArticleRPM command errored, Delete /dev/shm/yumwrapper/* and try again. Exit code 3
@DinGoBlue wrote: I have the dreaded “RPM command errored, Delete /dev/shm/yumwrapper/* and try again. Exit code 3”. I have had variations of this message from time to time but have only managed to...
View ArticleSpeeding up UCP
@MIKEK wrote: We are using FreePBX 13. The UCP is very slow. Looking at the usage statistics (CPU etc) I see no problem. What can I do to speed this up? New computer? Faster hard drive? Thanks! Posts:...
View ArticleDAHDI E1 setup with Rhino R1T1 T1/PRI and FreePBX 14, Asterisk 13
@Dendzo wrote: I’m trying to setup DAHDI with Rhino in Europe (ISDN Pri). I only see 24 channels, which means it is still in T1 mode. How do I switch it to ISDN Pri (E1)? Posts: 1 Participants: 1 Read...
View ArticleSystem hangs after call received
@mjmcbride wrote: So, i had a power outage, and the system came back up without any errors or warnings. Except that now, the whole thing shuts down after handling 1 call. no logs are generated, trunks...
View ArticleHelp Accessing Sangoma FreePBX 100 With Putty
@Jaybk26 wrote: Hey everyone, I’m trying to access my Sangoma server to reset the root password for our phone server installation. I’ve used this guide to access the server via a serial cable using...
View ArticleDo I really have to make a queue for each extension?
@lukemti wrote: We want callers to be able to be sent to extensions who are currently on the phone or busy at their desks without sending them to voicemail or another destination. I know a solution...
View ArticleLine Keys VVX410 Freepbx 13
@comartel wrote: I am using Polycom VVX410 Phones with Freebpx 13. Some have the VVX Color Extension Module. Previously I was able to set the line keys through Freepbx but I cannot for the life of my...
View ArticleFreePBX Internet Connectivity
@hmahaso wrote: Hi guys… I am a newbie in FreePBX and my question is how do i configure my freePbx to call using the internet? Posts: 1 Participants: 1 Read full topic
View ArticleFreepbx hangs failing to refresh keys
@DinGoBlue wrote: The Configuration FreePBX 14.0.5.25 System 12.7.5-1902-3.sng7 Memory 32GB Disk 512GB (mostly free) Background I am training receptionists on a new pbx and want to simulate many...
View ArticleClean install, SIP connections 403 Forbidden
@jacksm wrote: I had been having trouble getting my SIP connections to persist for more than a few seconds following a restart. I was pursuing this in another call ([freePBX trunk to inbound route...
View ArticleClik here to view.
After internet comes back on I need to reboot FreePBX in order to be able to...
@JohnnyBeGood wrote: Hello, Every time my internet goes down or do something on my router and when the internet is back all trunks cannot reconnect and say request sent and only option is to reboot...
View ArticleIVR application gets user input OK but ignores it and times out
@Adrian_Stephens wrote: I’m new to this forum, so apologies if I’m posting this in the wrong place. I have an up to date (version 14.0.5.) FreePBX installation running in a QEMU virtual machine with...
View Article10.13.66-22 Module Updates Fail and Currupt Userman...
@jerryriggin wrote: I’m having this issue on a dev vm running in ESXi. I have to upgrade a few production systems at the 10.13.66-22 level which need many module updates and upgrade to SNG7. So I did...
View ArticleHelp for installing LDAP Phone Book for FreePBX
@Noppes wrote: I recently came across the LDAP-Server for Freepbx (https://github.com/a1comms/freepbx-ldap). I would like to use it, but I am not sure how to install it. I am not a Linux expert. Can...
View ArticleProblem recurrent message ' Error parsing '4294967295': String value was...
@johnx102 wrote: Hi , i need help for understand something, i have freepbx install with many trunk and many extension, all is working normally. But since 2 month, i have lot of recurrent message in...
View ArticleInstallation keeps rebooting on an Intel NUC
@irperera wrote: the new version 1805.142, when trying to install the freePBX from the latest Distro, the installation process keep restarting. Posts: 1 Participants: 1 Read full topic
View Article