Freepbx.class.php
@acrist wrote: /var/www/html/admin/libraries/Console/FreePBX.php doesn’t exist I get this output randomly in the CLI and when it happens the Admin GUI does not load either. The phones still work and...
View ArticleUpdate all IVR recordings
@rbroadstreet wrote: FreePBX 14.0.11 We’ve recently decided to change the recordings that are used. The powers that be, do not care at all for the woman’s voice that’s used, nor the “Welcome to...
View ArticleRecording OutBound fails
@clientium wrote: Hi all. I’m new here, although I’ve been reading the forum for a while. I have official registration and acquired the call center package. Everything has been working correctly until...
View ArticleRing group timeout wrong on first phone
@cursor wrote: I set up a new ring group with a random strategy. It has 5 extensions. I set the ring timeout to 8 seconds for about two rings for each phone. The problem I have is that the first phone...
View ArticleEPM and Multiple accounts on different PBX
@dvsatech wrote: I have a Grandstream GXP2170 with the latest version of Firmware (but my questin should be relavent to any phone that supports multiple accounts) setup on a freepbx 14 (#1) via EPM...
View ArticleBuilt-in voice mail in freepbx causes random reboot of phones
@Sreekumar wrote: We set up the buil-in voicemail in FreepBX, now whenever the user gets a voicemail MWI blinks after that phone will keep unregistered and registering. Posts: 2 Participants: 1 Read...
View ArticleDirectory Name Announce set to TTS by default
@lentilbean wrote: Hi. How can I set the default Name Announce in my directory to TTS? In the extensions setup I have added users to the company directory, however, there appears to be no option to...
View ArticleClik here to view.
Warm Spare Backup Changes System Name: FREEPBX_SYSTEM_IDENT
@bradm413 wrote: FreePBX 14.0.11 Current Asterisk Version: 13.22.0 PBX Firmware: 12.7.6-1904-1.sng7 PBX Service Pack: 1.0.0.0 When our nightly warm spare backup job runs, it’s changing the name of our...
View ArticleFollow Me - cannot turn off
@dux wrote: Hello, I turned off Follow Me, but, when I dial the DID, it throws the channel unavailable error. I need to disable forwarding, but a subscriber should not hear any errors, just ringing...
View ArticleSeize Failed when calling from the "callers" softkey on the phone
@Kafluke wrote: FreePBX 14. Whenever a user tries to call someone back by selecting “callers” from the top softkey it says seize failed. If they manually dial the number the calls works fine. Any...
View ArticleClik here to view.
Exception after update from FPBX 13 to 14
@1A2 wrote: Updated system over the weekend. System was an old, under powered Atom machine running FPBX13. I loaded FPBX 13 on a new machine, and restored the backup. Had a couple issues with mysql...
View ArticleCustom Follow Me setup
@tkalinoski wrote: When an internal extension is dialed we are trying to configure the call flow as follows: Ring cellphone # and desk phone extension at same time If no answer after X seconds, ring...
View ArticleClik here to view.
PBX Blocking Remote site again
@edricksmith wrote: FreePBX Blocking IP Randomly FreePBX This does not necessarily mean that the PBX is blocking the IP. Unless you see it somewhere where it says blocked. Do you have SIP ALG or a...
View ArticleAgent login or agentcallback login?
@invictamix wrote: hi everybody following scenario that I do not know very well how I can create it and that is why I come to ask for your help. I would like to create several posts with extensions...
View ArticleSIP Registrations Fail on *2nd* "Apply Config"
@DaBorg wrote: Hi All, We’re seeing a fairly strange problem with applying FreePBX config changes. On the second time we click the “Apply Config” button, all SIP registrations “go away”. It’s always...
View ArticleAuthenticate via a userID number and a pin
@lmon wrote: Hello I would like to proceed with an authentication of my user with the IVR, means : user calls asked to provide his userid number ( 44556655) asked to provide his pin ( 1234 ) he is...
View ArticleRoute to queue from custom dialplan
@cerien wrote: Hello I have a small dialplan code that allows to determine to which queue an incoming call should be routed. I know I can probably do a Queue(name) to do this - is this the right way ?...
View ArticleRecording calls sent to "Lenny"
@Vietyank wrote: I’ve got the Blacklist Loser module working. Calls transferred to ring group 666 get blacklisted. When the user calls back, they get routed to Lenny. I would like to enhance this with...
View Article⚠ Issue on all FreePBX updated - not working with Bria Push Service
@iseb wrote: I know we could blame Bria first, but I’m trying and testing since Months. I reinstalled a Fresh FreePBX instance and made the tests. So it’s not only my old instance. Worst, it’s doing...
View Articlesecurity in freepbx
@chuecosoft wrote: how to connect by a single ip address by ssh and wep to freepbx and block the rest Posts: 1 Participants: 1 Read full topic
View Article