Simple phone with parked call light/notification?
@jimf wrote: Hi guys Could somebody please recommend a phone that has a feature whereby all other extensions are notified of a parked call, either by a light or on screen message? The system I intend...
View ArticleExternal SIP Extension Rings but hangs up immediately when picked up
@fizgig10 wrote: I've forwarded 5060 and 15000-15100 to my Asterisk server which has an internal address of 192.168.1.14 I've setup my asterisk SIP settings to know about its external address (it...
View ArticleClik here to view.
Issue with v12 repo URL/sites
@GeekBoy wrote: Getting this error: The following error(s) occured: - Unable to connect to servers from URLs provided:...
View ArticleEdit queue or ring group members with a script
@mikeybs1 wrote: I would like to be able to add or remove extensions to a ring group or queue via a script. I know I am not supposed to go editing the text files manually, so I assume I shouldn't have...
View ArticleIssues with Cisco 2811 as PSTN gateway
@radiowave911 wrote: I have a Cisco 2811 router with 2 x 4 port FXO cards and 2 x 2 port FXS cards. I want to use the FXO for PSTN gateway and the FXS for a couple of analog lines. I have a working...
View ArticleProblem with SIP trunk configuring with 2 LAN interface
@ogimax wrote: configured with 2 LAN interface between 2 different networks, One is connected Skype Lync server, other one is configured SIP number, Problem is i can not make a call outside and...
View ArticleFreepbx 13 time group matches, but plays IVR of non-matches!
@lhalepH wrote: Hi,I haveAsterisk 13.7.2 with FreePBX 13.0.89 on Ubuntu 14.04.4 LTSI have a weird behavior and need desperately your assistance. I have created a time group that matches closing times:...
View ArticleResponsive Firewall blocking legitimate users
@cmhxaktsoft wrote: I've been using the responsive firewall module for about 3 months now, and more or less it seems to be working as it should. I have 8 home users who sign in intermittently from...
View ArticleClik here to view.
Lots of bad calls in CDR. Firewall working?
@techd00d wrote: Getting a ton of these calls in the CDR reports. I have tried both disabling and enable the responsive firewall. I do not have anything whitelisted except my office wan IP. I have...
View ArticleFax lines over PRI to remote building via site to site fiber
@jarvisswope wrote: I have charter installing two PRIs for voice services. I have a Adtrans for th fax lines in building A but need to get fax lines in building B. I was going to try to use a grand...
View ArticleRing Groups restarting after 30 seconds
@dekernul wrote: I have noticed that my ring groups have started resetting themselves after 30 seconds. If I change my hunt extension ring times to 10 seconds, then I can get three extensions to ring....
View ArticlePhones not connecting to PBX over failover ISP
@sfalagrady wrote: Thank-you, when I plug a phone into my standby ISP modem, the phone gets an ip but does not connect to the pbx (the pbx is in the cloud). I was lead to this behavior when I failed...
View ArticleTLS/SRTP, getting busy signal
@sktanmoy wrote: I've enabled SRTP in my Asterisk 13 based server.Detail specification is here: CentOS: 7 64bit FreePBX: 13.0.97 Asterisk: 13.7.2 pjsip.transport.conf [0.0.0.0-tls] type=transport...
View ArticleProblem getting Sip port binding
@rdesilva wrote: Hi I am new to FreePBX (8). We are currently running an older version of the application and I am trying to create a new server with FreePBX 13 and Asterisk 13. When we try to connect...
View ArticleWeb call back customizing
@pbx3 wrote: Hello, When we use the web call back iframe it sends messages to the user like, "The page at http://IP address says: That number is invalid as a callback number" We would like to send the...
View ArticleCan I make changes to the Meetme table?
@dkeeper09 wrote: I'm making an external web page for some of our users to add and update their conferences. My question is: Can I add a column to the meetme table without breaking anything in...
View ArticleOutgoing routing with 2 voip gatewayes
@lhalepH wrote: Hi,I have Freepbx 13 and 2 external voip gateways (HT503 grnadstreams) with 2 corresponding trunks. I am trying to use the second trunk if the first is busy and vice versa. Is it...
View ArticleCurrent asterisk version in Asterisk Info differs from in mysql
@res13echo wrote: Yesterday I completed an upgrade from Asterisk 12.4.0 over to 13.0.95 using the PBX Upgrader module. It seems to work okay with only a few minor issues and the only remaining major...
View ArticleUnable to connect to Asterisk Manager
@lhalepH wrote: Hi,On a brand new installation of ubuntu 14.04.4 LTS, with Asterisk 13.7.2, and FreePBX 13.0.98 I get the red indication on top "Can not connect to Asterisk". When I issue (as root and...
View ArticleExtension specific outbound caller ID not working
@kestral wrote: I'm running FreePBX Ver 13.0.95 and finding that setting the "Outbound CID" in the extensions general tab doesnt seem to be doing anything. I have tried various settings in the field...
View Article