Time group migration
@lhalepH wrote: Hi,I have created a set of time group, and I want to replicate them on another freepbx server (same versions).Do you know where this information is stored so that I can copy paste...
View ArticleCDR Report is Blank
@rtaggart14 wrote: I have installed the latest FreePBX 13 Distro. All is working fine with the exception of CDR reports. They are coming back blank. I am not sure what to look for regarding setup. I...
View ArticleHow to reproduce the message of VoiceMail?
@pinzypbx wrote: Hello all, I reproduced the file only helped by filezilla tool, so I connect by ssh to my IP of freepbx and found the file in var/spool/asterik.. copied and listened. But are another...
View ArticleDisplay CID from inbound calls on extensions not actually ringing
@JamesHartley wrote: I have a ring group set up to take general calls and CID identified from the Asterisk phone book. The inbound route parameter is set to ring the first extension in the ringgroup...
View ArticleIAX Trunk between kalliopePBX and FreePBX rasp
@pinzypbx wrote: Hello, I want know if are possible created the trunk between two PBX.The first one so the master PBX is KALLIOPEPBX the second one is freePBX, so I want know if with free pbx I call...
View ArticleWhere is the Ext settings .html file located
@JSF wrote: Good day, So I am looking for the html file where the settings are kept where you select Recording Options Currently it states "Always", "Never" and "On Demand" What I want to do is to...
View ArticleCallthrough
@StephanK wrote: I need to configure our FreePBX so that one can all in from outside (Cell Phone) and do a call as if one was in the office. Caller ID from the company is shown and the outgoing call...
View ArticleSIPStation SMS Notice
@StephanK wrote: Hi, I have a few times gotten in trouble when I missed urgent SMS messages during my shift on the weekend. I wanted to set up a little cron job that checks every 15 minutes if a new...
View ArticleSIP trunk registration problem
@vmiro wrote: Hi, I'm having a problem registering my trunks to the providers SBC. I got everything working several months, and this morning trunks are refusing to register. Investigating a little bit...
View ArticleHide Source SIP trunk IP
@janakackv wrote: Hi All, We have a Sales office in middle east(Site-B) and a factory in a Asia country(Site-A). in both location we do have freepbx installed and SIP trunk connecting two sites. At...
View ArticleDeprecated Function PHP warning
@ndemarco wrote: I'm running FreePBX 13.0.101. While I was inspecting logs for other errors, I see errors like these: [WARNING] (libraries/modulefunctions.legacy.php:7) - Depreciated Function...
View ArticleISDN30 Trunk connection stopped working FreePBX 12.0.74
@motorbikes wrote: Server has been up and working fine but today it stopped connecting to the ISDN30 line, no incomming or outgoing calls. On the system overview page I see the line "File...
View ArticleTagging traffic leaving FreePBX with QoS value - DSCP ef 46
@pingfx wrote: I cannot find a clear concise example on how to make sure traffic leaving FreePBX is marked with a DSCP QoS tag. I would like to get this done with FreePBX before it gets to any router...
View ArticleAdding music in background of call
@TimTycho wrote: I was wondering if it was possible to add music into the background of all connected calls using freepbx Posts: 1 Participants: 1 Read full topic
View ArticleProblems with Blind Transfer, PJSIP (Aastra 6869i)
@mitterhuemer wrote: Hallo everbody,i need some help with my PJSIP Aastra Phones (6869i) i have problems with Blind Transfer. In my test i called my PJSIP extension from cell phone, then i made blind...
View ArticleWhat is the default password for user ; "asterisk" for FreePBX
@Donkay wrote: I needed to allow the redundant asterisk server to connect to the primary asterisk server so that a schedule can be created on the redundant server using backup/restore module but ran...
View ArticleDevState for Custom extensions
@kristiandg wrote: Good afternoon. I initially opened this over on the Asterisk forum, and the findings there led me to open a bug, but I was asked to put the issue in these forums instead. Here's the...
View ArticleClik here to view.
UCP Home page Keep showing connecting
@gurvinder2050 wrote: I have created an extension 1001 and have also enabled UCP login for the same user. When i am logging in with user name and password , UCP keeps showing connecting..... in the...
View ArticleHow to migrate from Cisco Call Manager to Asterisk Asterisk
@osaumet wrote: Hi everybody First at all, thank you very much for reading me. In the company where I work, we are having some issues with CISCO 3800 and we would like to migrate from Cisco to...
View ArticleIncoming line problem FreePBX
@lucate wrote: Hello everyone, I'm setting up my Asterix switchboard with Freepbx 2.8. The input channels are driving me crazy. I set up the internal phone; when there's an out call it's all ok,...
View Article