Incoming SIP issue
@2Socrates wrote: I am trying to determine why my incoming calls are not working. I have tried almost everything I can think of. Currently all firewalls are off and my calls do not get through....
View ArticleFreepbx Services Stop
@osiandtrix wrote: So in essence I installed a new FreePBX, and its great considering I just moved from Elastix 4.0 after it failed on me. Definitely a lot of audio and sound issues we were having...
View ArticleRestore not working, no errors
@tirvin wrote: I'm trying to restore a backup taken on a 10.13.66-12 system to a 10.13.66-20 system. If I exclude the /var/www/admin area then there are no errors, but none of the PBX settings show up...
View ArticleHow to enable facilityenable=yes for PRI span in DAHDI config module
@np_pyro wrote: I have a PRI span setup with a Digium card. I am trying to sort out some issues with caller id. Is there some way to add facilityenable=yes to the span config? From...
View ArticleParkfetch.agi causing issues
@Keithc wrote: I have a system with CPU @ 100% and load average 25. top command shows 99% wait time for cpu top - 14:59:13 up 19 days, 4:27, 2 users, load average: 25.10, 25.06, 25.01Tasks: 180 total,...
View ArticleNeed Help To Troubleshoot Changing Outbound CallerID For Routes
@JimFromRamJack wrote: Hi,Our FreePBX (Asterisk 11.8.1/FreePBX 5.211.65-6) uses Routes to send calls to other states/area codes. In the past, when we'd call (e.g.) some customer in Florida, the call...
View ArticleHow to make Seamless multi PBX system dialing
@LeTest40 wrote: Dear All , I am a not advanced but not a completely clueless user /Admin. I have 4 PBX's (3 IP PBX and One Analogue ) . all 3 IPPBX of FreePBX of course are connected with IAX2...
View ArticleConnect Freepbx to Avaya CM using PRI
@bajramia wrote: Hi Team,I'm trying to connect freepbx to Avaya but I don't have any sip trunk on Avaya only what I have is PRI and I got a PRI on my freepbx I need help on this setup thank you....
View ArticleRegister extensions with the same name on different servers
@Trezeguet17 wrote: HI, recently i have received a request from various persons of the enterprise where i am working, to create various user extensions, that have the permission to listen and whisper...
View ArticleReplacing Avaya CM with Freepbx
@bajramia wrote: Hi Team,We have about 4 avaya G650 for analog lines what is the best replacement for them i looked Sangoma Vega 5000 but is not released yet thank you Posts: 2 Participants: 2 Read...
View ArticleFreePBX 14 RC stalls at item 570 on install
@gregorywest wrote: I am trying to do an install of FPBX in a VMWare machine.and Asterisk 14 stalls when it gets to installing item 570 of 646 objects. Any suggestions? Posts: 2 Participants: 2 Read...
View ArticleInvalid extension but no invalid handler
@jcarle wrote: I'm having a problem with my installation of FreePBX. I can't seem to track down the source of the error, nor do I know how to debug it really. Anyone able to help me take this appart?...
View ArticleHelp Moving NAT from Public to Private IP Range
@gsandler wrote: Hi Currently we have Free PBX on a public network address 96.xx.xxx.xxx for security we want to move the machine to a private address ( 10.0.0.xxx ) and NAT the 96.xx.xxx.xxx to the...
View ArticleLessons learned
@rbailey wrote: (1) Don't license modules on your system till you have all the hardware installed, and that really applys to your NICS. I have 3 and got deactivated after I connected them to a network...
View ArticleUsing an Cisco 2821 as FXO trunk and FXS suscriber - Best practice -
@FrankRadio wrote: Hi there!Finally and with a lot of help from this forum I get my FreePBX and cisco running together.Now cisco as FXS (subscriber) works great, but when I set it as FXO trunk all the...
View ArticleFollow me and extension's no answer destination
@fmc wrote: There is the following setup: I'm using FreePBX 13.0.191.11 on the distro. There is small office with 2 phones which have their own sip account. This office has a virtual extension with a...
View ArticleClik here to view.
IVR Broken after upgrade - View::destinationUsage()
@fboyd wrote: After upgrading the IVR to the latest (13.0.27.1) (freepbx 13 distro) I get the error shown in the screenshot when going to edit a existing IVR, however it does seem that creating new...
View ArticleTLS/SRTP with Sangoma S500 and Cisco SPA508g
@Connex wrote: Hey guys, my first post here. I have been trying to configure my pbx and my two lab phones to connect through tls/srtp connection but for some reason can only make it work with Zoiper....
View ArticleMySql Permission issue in FreePBX 13 Installation
@jayu0103 wrote: Hi,I am trying to install FreePBX v13. Apart from this, My PHP 5.6, Asterisk 13 and MySql 5.6 are working fine. In "./install -n" i am getting the error No /etc/freepbx.conf file...
View ArticleNeed Help - PRI Provider not receiving dialed digits on outgoing calls
@starling wrote: Hi,I have a new install of FreePBX 13 and have an issue with outgoing calls. My PRI provider sees the calls getting to them, but they are not receiving any of the dialed digits. Below...
View Article