Quantcast
Channel: FreePBX - FreePBX Community Forums
Browsing all 17351 articles
Browse latest View live

The following packages have been kept back: freepbx17

Hi, apt-get upgrade reply is : The following packages have been kept back: freepbx17 0 upgraded, 0 newly installed, 0 to remove and 1 not upgrade How to deal with this message ? Thanks. 1 post - 1...

View Article


Inbound Route destination to trunk group

I have 6 trunks and 1 inbound route. How i can set this route send call to first available trunk? 6 posts - 4 participants Read full topic

View Article


Multiple DID with base number (GNR)

I have now 100 DID numbers from my voip provider in format 123456xxx (xxx= 400 to 499) Since pbx extensions numbers are indeed 4XX , is there a way to avoid the use of 100 inbound route and simply...

View Article

T1 with TCIC's

Anyone know how to configure a T1 with TCIC codes? The T1 is AMI and I have no alarms but the framing is not right and there are TCIC codes to be configured from upstream. 1 post - 1 participant Read...

View Article

CID of incoming call manipulation

Hello everyone, I have a general question about reading the Caller ID (CID) of an incoming call from a header other than the default. Is there a setting that I need to check or fill in to specify the...

View Article


No incoming call

Hello I have freepbx 16 with only one trunk (fxo grandstream gxw4108 192.168.1.aaa) I have no problems with outging call, but i dont receive any incoming calls Peer details: username=9001 type=peer...

View Article

Auto Answer only calls from Specific Extension

I have a FreePBX licensed On-Premise at one of our clients. We have 2 phones at the front desk. One was a FreePBX extension that receives calls from 2 elevators that use FXS Grandstreams. We had that...

View Article

Dymamic routes module in v17

I just installed the v17 beta on Debian 12. Yay! I love Debian, so this is good to see (for me at least). Only issue is that dynamic routes is not yet available as a module on v17. Is there a roadmap...

View Article


Call pickup

Hello, Is it possible to enable call pickup feature on Cisco 79XX phones? If yes, how to do it. Thanks for your help. Regards 1 post - 1 participant Read full topic

View Article


CID sipgate trunking P-Preferred-Identity

Hello to the community, it’s my first post and i am new to freepbx. Here is my issue. Is there anyone who can help to solve the problem? I want to send a P-Preferred-Identity Header in an pjsip-trunk...

View Article

No voice is heard on an incoming/outgoing call

On FreePBX I have two eth… LAN 192.168.1.a/24 (phones are also in this network) and for VoIP trunk 10.224.33.xx to connect for Operator host 10.40.0.x Peer settings: username=7232aaabbb...

View Article

Ring extension aprox 1 ring, then ring a ring-group

I have a need to have an incoming route ring one specific extension for 1 or 2 rings, THEN ring a ring group (for like 30-45sec). Do I send the incoming route to the extension and setup some time...

View Article

Do Not Disturb Question

A customer has 3 phones that have two lines attached to their phones (personal extension and main line). One of them hit Do Not Disturb wanting it to only affect calls coming to her personal...

View Article


Asterisk h extension dose not work and it jumps to the hangupcall macro

I have a dialplan like that: [from-internal-custom] include => voiping [voiping] exten => 5002,1,noop() exten => 5002,n,agi(senarios/specific-call.php) exten => 5002,n,hangup() exten =>...

View Article

Get DND Status using RestApps?

Does anyone know if the RestApps DND module has any way to return the DND status of a user? For example I can go to mypbx.com:5443/applications.php/donotdisturb/main/?user=1234 to toggle DND on or...

View Article


Extension Routing vs Custom-Context

Hello, everyone, I am migrating a very old PBX to FreePBX. The old PBX uses the “Custom-Context” module and I was wondering if it would be possible to use the “Extension Routing” module instead. I...

View Article

ATTENDEDTRANSFER not reported to /var/log/asterisk/queue_log

Hello i noticed on Freepbx 15 and 16 asterisk 18 and 20 even when. I’m using *2 or ## both ATTENDEDTRANSFER and. BLINDTRANSFER events are not reported to queue_log WHY ? Please advice 3 posts - 1...

View Article


FreePBX 17 Install script fail

Hi i tried to install FreePBX 17 With Debian 12 on Google Cloud and was unsuccessful 2024-04-27 04:58:41 - Installation failed at step Wrapping up the installation process. Please check log...

View Article

Music on Hold is played sometimes

Hello I use a ring group for operators to receive incoming calls. For unknown reasons, the music sometimes plays, sometimes not. No patterns can be identified. What could be the problem? The problem...

View Article

Sipstation, P2P SMS

I’m actually using Flowroute and 3CX but I want to begin offering telecom services to other small businesses like mine and it seems like FreePBX would be the better option to offer. However before I...

View Article
Browsing all 17351 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>