Outbound calls broken after Time Conditions change
@Janthro wrote: Ok, here is the scoop.I added an IVR to our system for after hours. Everything seemed to be working great, until the IVR became live. As soon as our Time Conditions switched over to...
View ArticleCustom Context / Outbound Calls
@mferry wrote: I been using Asterisk for years and have always maintained sip.conf/extensions.conf manual. I have installed and setup FreePBX for a small company in the last week. Everything is...
View ArticleNeed Help Please
@chris3252 wrote: Good Afternoon I am in urgent need of help Okay my current setup is as follows I have an Grand-stream GXW410 PSTN Gateway I have my 4 analog lines coming in the Gateway to trunks on...
View ArticleClik here to view.
How Set Idle time on phones connected to one raspberry pi 3 ( Interruption )
@ArashF wrote: Hello Everyone, I will be so happy if someone can help me for a solution on my case , I have Raspberry pi UP with asterisk and all proper config for sip trunk and phones, I can make...
View ArticleSangoma Appliance Hacked?
@gavo wrote: Hello, A friend of mine had a Sangoma freepbx appliance installed that whilst it is working fine has seen some strange attempted calling behaviour in/around 1am GMT every morning - as...
View ArticleGuide to using custom config files?
@mlaihk wrote: Is there any guides to using custom config files for Freepbx? I am trying to add T.38 entries to pjsip.endpoint.post.custom using the following syntax and nothing get added. As this a...
View ArticleUpgrading to freebpx 13 and cisco 303 not registering
@kelly7552 wrote: I'm a small time user who is upgrading from my 3 year old raspberry pi running freepbx 2.11 to a ubuntu 14.04 running freepbx 13.0. A lot has chaned for my poor extension menu. I'm...
View ArticleFreePBX incoiming calls not working
@PGX wrote: Hello, I am trying to set up new instalation of FreePBX.I had problem with registration of SIP account on old one so I have decided to install new fresh one. Everything works besides...
View ArticleClik here to view.
Queue Log shows call abandoned when it wasn't
@aarond wrote: Have Freepbx 13.0.192.16 we are noticing that when calls are answered via a queue that sometimes the queue log will show the call as abandoned even though the call was answered....
View ArticleControl call routing
@pasi wrote: I am having 2 VoIP trunks configured in my FreePBX 13.0.192.16.Call trunk A and B from 2 different providers.Trunk A was configured a while before trunk B.Outgoing calls have always been...
View ArticleBunch of errors and problems since last update a few days ago
@omnicom wrote: About 2 to 3 days ago I finally got around to updating all the modules on my FreePBX Asterisk Version: 13.14.0. Now I have all kinds of errors going on. The "Apply Config" Red button...
View ArticleUnable to login to UPC
@pasi wrote: My FreePBX server was on version 6.12.65-22 and I was still able to login to the User Control Panel with a user logon account. However, right after upgraded to the version 10.13.66-1, the...
View ArticleTrunk configuration help for a noob - infostrada/wind italian provider
@Fulvietto wrote: Hi all. Sorry to have to bother you but I'm not able to resolve a configuration issue that seems simple but, even if i've searched a lot, i can figure out how to solve. I'd like to...
View ArticleCreate Voicemail from PHP script
@avremy wrote: Hi guysI am writing a PHP script that will create a user extension and voicemail for users, I can't seem to find the function that creates voicemails Can anyone help? thanks Avremy...
View ArticleUnable to successfully install
@electroplated wrote: Hi All,I have tried pretty much everything I can to try and get FreePBX installed on a NUC7i5BNK, including advanced installation and old versions, however, nothing I try seems...
View ArticleWhats wrong with FreePBX?
@soamz wrote: Hi, we just got FreePBX live with our ALLO GSM Gateway. Now we got the call from the sim vendor that, since last few hours, the sim has got 15000+ international pulse mins and the bill...
View ArticleThe ring seconds doesnt work in FreePBX?
@soamz wrote: Hello, I have the ring group of one area set to 120seconds, so that if someone is calling, his call should ring for 120 seconds trying to reach someone, but right now, it automatically...
View ArticleHow to setup auto loop to all users until received?
@soamz wrote: Im using a GSM gateway with 4 channel, where 1 channel is used for incoming and other 3 are being used for forwarding. Right now, when a customer calls, I can see that, it tries to call...
View ArticleError on Voicemail module upgrade
@GeekBoy wrote: I am not finding this discussed anywhere else: Coding Error - don't understand 'Change the email body, variables: VM_NAME, VM_DUR, VM_MSGNUM, VM_MAILBOX, VM_CALLERID, VM_DATE' from...
View ArticlePotential Fraud through Misc. Destination
@dev246 wrote: Hi i report a bug in freepbx issue tracker as issues.freepbx.org/browse/FREEPBX-16293 But maybe someone will come with solution or some workaround faster, or will be warn and disable...
View Article