DAHDI problems

@tletourneau wrote:

Hello,

I am running FreePBX 14.0.4.5/Asterisk 13.22.0 and am having a problem getting DAHDI recognize the Astribank 2 I have attached to the new systems I am installing. In an attempt to reinstall DAHDI on one of the systems (I have not tried on the other system yet) I am running into some issues. I have tried with a couple of versions of DAHDI and received the same errors. lsusb shows the astribanks connected:
PBX1:
Bus 001 Device 002: ID e4e4:1160 Xorcom Ltd. Astribank 2 series
PBX2:
Bus 001 Device 003: ID e4e4:1160 Xorcom Ltd. Astribank 2 series

When I try a make clean I get the following:

[root@fnbpbx2 dahdi-linux-complete-2.11.1+2.11.1]# make clean
make -C linux clean
make[1]: Entering directory /root/dahdi-linux-complete-2.11.1+2.11.1/linux' make -C drivers/dahdi/firmware clean make[2]: Entering directory/root/dahdi-linux-complete-2.11.1+2.11.1/linux/drivers/dahdi/firmware’
rm -f dahdi-fw-*.o
make[2]: Leaving directory /root/dahdi-linux-complete-2.11.1+2.11.1/linux/drivers/dahdi/firmware' make -C M='/root/dahdi-linux-complete-2.11.1+2.11.1/linux/drivers/dahdi/oct612x' clean make: Entering an unknown directory make: *** M=/root/dahdi-linux-complete-2.11.1+2.11.1/linux/drivers/dahdi/oct612x: No such file or directory. Stop. make: Leaving an unknown directory make[1]: *** [clean] Error 2 make[1]: Leaving directory/root/dahdi-linux-complete-2.11.1+2.11.1/linux’
make: *** [clean] Error 2
[root@fnbpbx2 dahdi-linux-complete-2.11.1+2.11.1]#

When I try a make I get the following:

[root@fnbpbx2 dahdi-linux-complete-2.11.1+2.11.1]# make
make -C linux all
make[1]: Entering directory /root/dahdi-linux-complete-2.11.1+2.11.1/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory/root/dahdi-linux-complete-2.11.1+2.11.1/linux/drivers/dahdi/firmware’
make[2]: Leaving directory /root/dahdi-linux-complete-2.11.1+2.11.1/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 3.10.0-862.9.1.el7.x86_64 kernel installed. make[1]: *** [modules] Error 1 make[1]: Leaving directory/root/dahdi-linux-complete-2.11.1+2.11.1/linux’
make: *** [all] Error 2

I have verified that the kernel-devel matches the running kernel and am at a loss. I have removed the old DAHDI modules and am looking for any guidance. I’m not against a support ticket but I am only on site through the end of business tomorrow and the call back times for support don’t indicate I would get a call while on-site.

Any advice is greatly appreciated!

Posts: 3

Participants: 2

Read full topic