@jholme004 wrote:
I’ve been using two ATAs (Obi212 & NetGen) - The Netgen as a POT line going to it and the Obi has two GV Accounts. I’ve been thinking of adding a true SIP provider and have been trying BulkVS. Rates are good and thus far no issues - I’ve been using them for their free 8YY dialing since late November. today, I dialed an 866 number and it was dead air. I tried a test number - 800-444-4444 and again dead air. I look in my Asterisk logs and it shows that the call went through! I logged into BuklVS and they too show then call went through. Local calls thought the ATA lines work normally.
Any ideas?
My FreePBX instance is up-to-date (updates are done every weekend) and on an old HP EliteDesk. UDP 5060 and 5061 is port forwarded to the Elitedesk; no firewall on outbound traffic. I have BulkVS whitelisted in Fail2ban
I’ve also attached my logsBulkVS_8YY.tgz (3.6 KB)
Posts: 5
Participants: 1