No Audio on outbound connection
@jholme004 wrote: I’ve been using two ATAs (Obi212 & NetGen) - The Netgen as a POT line going to it and the Obi has two GV Accounts. I’ve been thinking of adding a true SIP provider and have been...
View ArticleRecording not stopping for a agent
@dwsiemens wrote: I have a situation where in the in Inbound route I have call recording set to yes, The inbound route eventually goes to a IVR with a route to queue. The queue also has the recording...
View ArticleSolution for deleting unused recordings/IVR/Ring groups
@MasterDenton wrote: Hey there, I’ve just inherited a FreePBX install, and I’m coming from a primarily 3CX background, so forgive me if the answer to my question is super obvious. I’m curious if...
View ArticleClik here to view.
Unable to connect to the UCP Node Server. Error: xhr poll error
@sentinelace wrote: I am running freepbx 15. Users can log on to the UCP but now get this message. I have tried setting up a ssl certificate with the same results. Any advice apprecaited. Posts: 1...
View ArticleEndpoint Manager showing endpoint IP address (says Show AOR)
@GRIFFCOMM wrote: Hi Using Sangoma S505 with EPM, (EPM > Extension Mapping) the IP Address says “Show AOR”, which does show the IP address, however how do i get the IP address to show up without...
View ArticleCall screening no answer
@nickzed wrote: Hey, firstly, most the semi related errors i find are more than 7 years old, but I hit a situation where one tenant wanted call screening, no problems it works great - but if they are...
View ArticlecardDAV support (for phone book / Directory)
@GRIFFCOMM wrote: Hi Is there any support planned for cardDAV for a directory? i see there is Microsoft Active Directory and openLDAP, cant seem to find cardDAV though… Many Thanks Posts: 1...
View ArticleMonitor Trunk Failures with Jabber notifications
@maxyca wrote: Hi guys! I want to receive notifications by Jabber when the trunk is down. This can be done? Thanks. Posts: 2 Participants: 1 Read full topic
View ArticleClik here to view.
Grandstream HT813 doesn't hang up FXO :(
@joelhauxwell wrote: Hello, I have spent hours on this problem with no positive result so I’m hoping that somebody on this forum might be able to help. I have a Grandstream HT813 connected to my...
View ArticleBMO calling module constructor repeatedly
@SteveA wrote: Good morning. I am new to working with BMO so hope that the below is clear and that this is the correct place to ask this sort of question. I am working to optimise an existing module...
View ArticleApply Config Missing after edit
@lpiekarski wrote: Hi All, I have this one installation that started acting weird, nothing major yet or that I have noticed. Each time I make a change, edit anything that normally would trigger the...
View ArticleIntermittant PBX will not answer some mobiles in UK
@monkeybike wrote: Hi, Having an increasing issue where various PBX’s are not answering calls inbound from mobile phones. It is intermittent, but have had a trace done on our SIP trunk Provider. Who...
View ArticleQueue Auto Pause is Pausing agents who have DND set
@Fraser wrote: Hello, I have been looking at the Auto Pause options of a FreePBX call Queue but it seems that when an extension’s DND is activated and they receive a call, they are automatically...
View ArticleClik here to view.
Only show custom php page if logged in to FreePBX Admin
@sorvani wrote: Is there a simple hook built in to the framework that we can check before loading a custom php page? I am already using the bootstrap to get to some functions. Posts: 1 Participants: 1...
View ArticleGetting registration error messages on PBX server even though registration is...
@prattu wrote: I have a dialer I’ve recently installed and I’m getting error messages from Asterisk: [2021-02-03 11:29:27] NOTICE[9106]: chan_sip.c:24776 handle_response_peerpoke: Peer '3902' is now...
View ArticlePolycom is "Unreachable" With /22 Metmask
@cgoodwin73 wrote: I recently expanded the DHCP pool for a customer that was already on a /22 LAN net (192.168.220.1 - 192.168.223.254), the DHCP just wasn’t using it all (only using using...
View ArticleIf external caller hangs up first, POTS doesn't hang up (using an OBI 110)
@Beachtech wrote: FreePBX 15.0.17.5 running on a Raspberry Pi (via RasPBX for my home system / experimental). I have an OBI 110 that I am using to connect the home’s POTS line to the FreePBX. I set it...
View ArticleNo Audio - Also unable to accept incoming calls
@kenwright8050 wrote: I am using Twilio as my SIP Trunk and the latest version of RasPBX. I had this working for a year or more until recently some field technicians from my ISP came to upgrade my...
View ArticleARI Asterisk
@Wagberg wrote: Good morning everyone! I am developing a project using ARI that wants to create channels (without depending on endpoints) and add to bridges. The idea is to simulate calls without...
View ArticleCommunity Contributions
@jfinstrom wrote: I noticed on github there is a lot of pull request and many are not responded to. I believe there was a policy change to submit PR’s through the official bitbucket. It probably...
View Article