What is the Best Solution for Call Reporting?
@susfreepbx wrote: Just like with the cudatel box we had before it seems call numbers are schewed by using ques and so on. I have a polycom phone that shows 400 calls in a day went to it but that...
View ArticleClik here to view.
Is there a way to table edit extensions or trunks or waht ever in the GUI, or...
@mannebk wrote: Hi Folks, I’m just curios how big company FreePBX admins (as the rent out admin guys at Sangoma for sure do) handle 5000 extensions 35 locations 250 trunks or what ever? If I want to...
View ArticleDoes activation care about IP's assigned to interfaces?
@MacsOffice wrote: I found out the hard way that activation uses the ETH ports config as part of the activation key process when it deactivated my machine when I re-ordered the ports. I think I have...
View ArticleClik here to view.
Error trying to add Exchange Calendar
@mkaye wrote: image.png1202x103 24.3 KB trying to use my Exchange Calendar it autodetects my info mark Posts: 1 Participants: 1 Read full topic
View ArticleChanged networks and no access to GUI
@jcroy wrote: So we moved our PBXACT 40 from one network to an entirely separate network. Before I could get to the GUI but now I cannot. I’m guessing its a simple problem, I’ve tried setting a static...
View ArticleCan't add custom basefile edit
@matthewljensen wrote: I’m not able to add a custom basefile edit for a grandstream GXP-2170. The “add entry” button is there, but when I click it, add the description, parameter, and value, and hit...
View ArticleAll Circuits are busy now
@Nksahu wrote: Dear Team, Now-a-days we are facing strange and serious issue with DAHDI calling. We are using FreePBX with this card. We are getting message “All Circuits are busy now”. I am novice to...
View ArticleUnavailable for new calls when phones are ringing
@Robbert wrote: Hello all, We are using freepbx with one incoming trunk and one ring group with a couple of phones. When we are receiving a call and we are not answering the call in 20 seconds or when...
View ArticleClik here to view.
Unable to Retreive Parked Calls
@zigge wrote: Hi, Recently upgraded from FreePBX v13 to v14. Experiencing an issue retrieving parked calls. User’s handset is set with two soft keys Park (*270) and Retrieve (*8571). The user is able...
View ArticleYour call can not be completed as dialed
@christianjensen wrote: No calls allowed, other than between extensions. Normally this is solved by typing in time groups or time conditions. This time is different. Freepbx does not remember the data...
View ArticleAsterisk How to register and add Cisco CP-8945 8945 VOIP Phone
@jfall wrote: Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Issue with inbound fax to email
@elarsen wrote: Hello all, new freepbx 13 install. Everything else is working as expected. Having an issue with inbound faxing. Outbound fax works fine from UCP I have a DID and inbound route assigned...
View ArticleOoh323 installation
@bajramia wrote: Hi Team, I have install FreePBX 14 and Asterisk 13.18.4 im trying to install ooh323 channel when i run module load chan_ooh323.so i get an error chan_ooh323.c:2834 reload_config:...
View ArticleClik here to view.
UCP - Phone
@comtech wrote: I saw this post and wondered if the landscape has changed? Hold has been implemented. Is transfer and conference an option now? If yes, is it already on the roadmap? Such a slick...
View ArticleWhat would you like to see added in FreePBX 15?
@GameGamer43 wrote: As we embark on FreePBX 15, we’ve come up with two main themes which we’ve shared with the community at this past years Astricon event. The first is a completely redesigned backup...
View ArticleHow to use ICE and Directmedia together in FreePBX?
@Arunbalannv wrote: I am using Asterisk 13 and Enabled ICE support configured STUN and TURN. That time I was able to make phone calls from all types of Networks including most restrictive NATs. The...
View ArticleRandom Calls on the CDR
@kd2dwj wrote: So I just setup a new server, using the new FreePBX 14.0.1.20, setup the responsive firewall for chan_sip (not using pjsip) and everything working wonderfully Made sure SIP Guests was...
View ArticleWhere has the "Asterisk Info" page gone?
@aeciolemos wrote: Hi everyone, I just noticed that under the Reports menu, the “Asterisk Info” page is missing. Anyone know where it has gone? I am running FreePBX 14.0.1.24 PBX...
View ArticleRemove 3 digits on inbound route
@haljbr wrote: Is there a way to do it on GUI? I need to remove 3 digits when I receive any call on a specific trunk. I know how to do it when dialing out. How to do it when there is an inbound call?...
View ArticleAnnouncements through Paging and Intercom Does not Disconnect
@intrigue wrote: Hello, I’m attempting to broadcast an emergency announcement using the Paging and Intercom module through all of the phones. Everything works as expected except I’ve found that the...
View Article