Adding root certificates for Twilio
@bobf wrote: I’m trying to setup secure (encrypted) communication with Twilio as my SIP trunk provider. Their instructions for setting up freePBX start by downloading a .pem file to be installed in...
View ArticleFail2Ban Firewall commands
@Charles901 wrote: I need to know the commands to Remove and Add IP’s to my allowed IPtables list. For example, there is an IP in the Table list as follows; -A fpbxnets -s 107.168.129.45/32 -j...
View ArticleMigrating from AsteriskNOW 2.0.2 to FreePBX (latest stable)
@wa1rkt wrote: Good afternoon all. This is a followup from a previous post on this topic that I posted here about three years ago. At the time I was not able to find a workable solution and so I left...
View ArticleUser Control Panel Error 500
@tjwells85 wrote: Starting last week sometime I can no longer access the User Control Panel. I am sometimes able to see the login screen, but most of the times not, and then I get an Error 500 “This...
View ArticleDial Plan - Dropping extra digits
@cjddraco wrote: Having issue with dialing out from FreePBX using a full vanity phone number that exceeds 10 digits. Need Dial plan syntax to drop characters after 10 digits are dialed. Exaggerated...
View ArticleCannot register FreePBX
@Vietyank wrote: I want to register an installation of FreePBX I enter my email and password (same as portal) but I keep getting an “account error” message. I can log into my portal at...
View ArticleFreePBX 15 download
@brian4 wrote: I note that I can download FPBX 15 which would then upgrade my existing installation and effectively copy over the old install. I want to be able to download a FPBX 15 distro and...
View ArticleFailed extension is not working with FreePBX
@vijo wrote: Dear Team, I have an Asterisk server (Version 13 ) running with php calling. When am using the php and AMI to call to call the customers and when the customers pick the call is not...
View ArticleWith no queue member logged in send call to IVR, if logged in but no answer,...
@avayax wrote: I have a queue with dynamic members, with a maximum of one member logged in at a given time. If there is nobody logged into the queue I would like callers to be directed to an IVR (via...
View ArticleGateway and DHCP on same subnet
@lentilbean wrote: Hi. I’m looking for a bit of guidance on setting up a FreePBX system with two NICs on the same subnet with eth0 as the gateway (WAN) and eth1 as a DHCP server for the phones (LAN)....
View ArticleFreePbx user loggin module
@hayku wrote: There is some module for FreePBX that aims to register user activities in order to audit them latter? Posts: 1 Participants: 1 Read full topic
View ArticleSimplest way to bar an extension from making an external outbound call
@Vietyank wrote: I have read a number of discussions about this topic but all offer more or less complex solutions or require the purchase of commercial modules. I am a newbie so I am looking for a...
View ArticleSome updates disappeared from FreePBX distro 10.13.66
@pdraganov wrote: A few days ago I started “yum update” but did not installed updates. I tried to install them this morning, but they disappeared from the repositories. Is there a reason new kernel...
View ArticleClik here to view.
With Initial Ring Time set to "0" in follow me, called phone still rings once
@avayax wrote: With follow me enabled and initial ring time set to “0”, the called extension rings once before the call proceeds with the follow me list. Is there a way to have the called extension...
View ArticleSet time condition to permanently matched through dial plan or XML
@avayax wrote: I would like my switchboard operator to be able to press a button and set a time condition to permanently matched. According to the wiki this is only possible through an application...
View ArticleInbound calls dropped at 30 seconds PBX requesting "BYE"
@tobywimberley wrote: Good morning all! I have a PBX that has been running flawlessly for over a month. Last Thursday, I received notice that suddenly, incoming calls are getting dropped after ~30...
View ArticleAll Extentions go unreachable once a day
@inatechsol wrote: System Setup: Router is USG-3P Lan connects into Unifi 24 port managed Switch Freepbx14 installed on a HP Desktop Computer (SIP service provided by Vitelity) connected to Unifi...
View ArticleUsing extensions_custom.conf to choke number of calls to an extension
@bjones3221 wrote: I am using extensions_custom.conf to create a choke for calls forwarded to a particular extension. The extension can accept 8 calls. The intended behavior is this; If there are less...
View ArticleGnu-glp license
@tonylee wrote: I have just finshed developing a conference system based on freepbx SNG7-FPBX, asterisk. I read the GNU-glp license, but came to wonder what needs to be required of me as a developer...
View ArticleHotel/motel blocking calls between extensions
@bigunk wrote: I have a small motel situation. Client wants all 21 rooms to be able to dial to the office phones only, but not from one room to another. She wants the office to be able to dial anyone,...
View Article