Grandstream HL503 incoming FX0 calls not routing to extensions
@robbo007 wrote: I have a Grandstream HL503 with a PSTN line connected to the FXO port. I want it to route incoming calls to an internal extension 300. Under the Grandstream HL503 I have configured in...
View ArticlePBX on a DMZ or not?
@willow wrote: Hi I have successfully updated our PBX from version 12 to the latest version via a restore and have configured the server to run in a VM. I have 25 Cisco endpoints and 5 remote workers...
View ArticleAri - rest api
@hwy419 wrote: Want to connect an external BRM system to Asterisk and get channel/recording information. http_custom.conf: [general] servername={redacted} enabled=yes bindaddr=127.0.0.1 bindport=8080...
View ArticleError: VPN Cert Days value is Changed: Rebuild VPN certificates
@sgseidel wrote: FreePBX 15.0.17.12 / Current Asterisk Version 16.15.1 / all modules up to date The VPN Server module had been working well as far as I’m aware. I recently added a Yealink SIP T-22P...
View ArticleModule Admin Crashes
@IanJanus wrote: When I try to go into Module Admin via the GUI it crashes with the following error " Exception RPM command errored, Delete /dev/shm/yumwrapper/* and try again. Exit code 2 - see...
View ArticleFreePBX 14 Install Errors
@ebony76 wrote: Hey folks, I’ve been banging my head for a while here and I typically figure things out, been doing these installs for over a decade (doesn’t make me an expert, just been following...
View ArticleOn premise and external Grandstream phones loosing connections
@bzaayer wrote: I have 2 different phone systems that are having random phones, both on-premise and external phones, drop connections. This problem started about 10 months ago when I changed over the...
View ArticleNetwork port amalgamation
@GRIFFCOMM wrote: Hi I notice there appears to be separate ports for each service in the PBX System Admin > Port Management 80 : Admin 81 : UCP 82 : REST API for Apps 83 : REST API 84 :...
View ArticleSPA echo - where to handle? FreePBX or the ATA Adaptor
@dan_ce wrote: Hilariously/tragically, this authority says do it on the PBX If you’re trying to fix echo problems with Asterisk, it’s probably best to make sure the Linksys box is not trying to do its...
View ArticleDisable EMail on Voicemail
@markcrobinson wrote: Can I tell the system that it does not need to send any email at all when someone leaves a voicemail? Posts: 1 Participants: 1 Read full topic
View ArticleHangs up when I dial an extension
@WeebHiroyuki wrote: Hi, so I’ve successfully set up FreePBX, configured TLS, and logged in properly, but whenever I dial an extension, take *65 for example, it hangs up after 1 second for some...
View ArticlePhones no longer connecting SSL Error
@HackerHarvey wrote: Hi Folks, So today everything was working well all phones connect and calling. I reset my root password and re-ran the firewall setup and for some reason, all phones are showing...
View ArticleEdit Userman names
@jlizzotte04 wrote: Silly question that I believe I already know the answer to, but we host many clients, some of whom have many extensions. Often times they change employees. If there any variables...
View ArticleOperator Panel & User Control Panel
@leorke wrote: I can’t enter the Operator Panel, got the message: err_connection_refused I can’t enter the User Control Panel, don’t know the user and password. My version: 14.0.16.4 Thanks for...
View ArticleSSL cert automation (outside of LetsEncrypt)
@GRIFFCOMM wrote: Hi The PBX is located behind a firewall and port 80 and 443 are in use, this means Lets Encrypt wont work on this box, however i need items like ZULU which needs a certificate. I can...
View ArticleGrandstream GDS3710 with GXP21XX phones
@antonis77 wrote: Hi , I know that this topic has been discussed already but i can t find a solution to that. but i cannot see a video preview in my phones I am using FreePBX 15 as a SIP server. Both...
View ArticleRing Group pick up issue
@netphoneusa wrote: This issue does not happen on the SPA series phones. It only happens on Yealink I have 2 ring groups #1 = Sales Ext 151 152 153 154 #2= Parts Ext 251 252 253 254 My extension is...
View Article2nd user in conference call drops after 30 seconds
@incognito wrote: Hi There, I am having a problem that is limited to one extension/user. When I call one of my internal extensions then I conference in the problem extension (112). Extension 112 will...
View ArticleCalls hangup after exactly 32 seconds
@Tragik wrote: Hello, I am having some issues with a FreePBX system dropping calls consistently at 32 seconds. I’m running FreePBX 15.0.17.17 with Asterisk 16.11.1. I’ve seen a lot of other posts with...
View ArticleForward to external #, but leave message on extension VM
@mike_b wrote: I have a question regarding forwarding to an external number. Is it possible to forward a call to an external number, but have the caller leave a message on extension if there is no...
View Article