RTP Stream for internal calls with Hosted FREEPBX
@aratel wrote: Hi, I'm going to deploy about 15 SIP phones in a company with a hosted PBX (Freepbx in cloud). Is there a way that internal calls (between the SIP Phones) can be processed without...
View ArticleCall recording format: ogg
@fmoretti wrote: Hi, I'm wondering if there's a reason for FreePBX to not display the ogg format in the call recording format combo. Asterisk support it and it's pretty good for saving space. Why it's...
View ArticleRecording calls to external number
@Almazick wrote: I'm planning to setup FreePBX but before I start, I'd like to ask if it's possible to record calls in the following configuration. I must be able to record all calls.The Main Number =...
View Article'Admin PIN' only validates if 'User Pin' is set
@pankajmi212 wrote: Hi, I'm struggling wiith a very strange issue with conferance rooms, the problem is with my conferance room 'Admin Pin' which if I entered incorrect, I don't get any error message...
View ArticleEvery Morning "All Circuits are busy try your call again later"
@omnicom wrote: Hi Everyone, I have a new system running FreePBX 13.0.190.19 Every morning when we come in, we are unable to make any outgoing calls. We get the message (All circuits are busy, please...
View ArticleSystem recording "access denied"
@Adalis wrote: FreePBX 13.0.190.19, Asterisk 14.3.0, Firmware 10.13.66-19 Setting up the system recordings for the IVR's. First recording completed by having the system call out. Feature code...
View ArticleEnable openvpn
@AlbertoFree wrote: Hello, how can I enable openvpn on freepbx?I already saw the wiki but in the menu System Admin does not appear the option of vpnHow can this be resolved?...
View ArticlePhone rings multiple times for one call
@bigmillz wrote: Ongoing issue that's starting to confuse and annoy people. Somebody calls in, gets sent to a phone via queue. Phone rings for a few seconds (completes the ringtone) and then says...
View ArticleWeb interface stopped working after update today version 14
@ellusiontech wrote: Today a did an update via the web interface and now the GUI works for a minute or so and then is unresponsive. I can't SSH into the server either. I tried fwconsole restart, this...
View ArticleClik here to view.
UCP status change DND
@vwg wrote: hi all, I have following problem on FreePBX ucp. when i change status to DND, it has no affect, the extension is still ringing. I have tried different versions of freepbx 13, but the...
View ArticleFresh install - all modules enabled by default?
@magicr wrote: I just installed the latest freepbx distro (64 bits) and noticed that all modules all Enabled by default? Am I doing something wrong - or is this default behaviour and should I...
View ArticleBandwidth.com trunks and FreePBX
@abeauchamp wrote: I'm having some trouble getting Bandwidth.com peer trunks to work in my FreePBX setup. Keep ending up with no-way audio. Can I get a couple examples of trunk settings for sip.conf...
View ArticleClik here to view.
Updates dont appear to be working
@Wasca wrote: Hi Guys I've just tried to run the system updates and it's been displaying this state for a few hours now. I'm assuming that it's failed to update. Unsure what to check to see where the...
View ArticleHow to choose 1 of 2 Outbound Routes on the Fly
@omnicom wrote: I'm running two different entities on one FreePBX system. I have two different Inbound Trunks pointing to 2 different IVRs and everything is working as expected on the Inbound side....
View ArticleError[6641] chan_sip.c:4273 Serious Network Trouble; __sip_xmit returns error...
@ellusiontech wrote: I am constantly getting this error on a new build of FreePBX 13. I have removed trunks and it still continues. Any idea to fix this would be greatly appreciated. I do have many...
View ArticleFailed to authenticate on INVITE to '
@frankge973 wrote: Outbound calls end in congestion/busy with that error.I changed voip operator. With old one it works correctlyI have not changed the format of Register...
View ArticleClik here to view.
Cannot Dial From Missed Call Log
@jonathanp1 wrote: I'm running Freepbx 13.0.191.11 with Asterisk 13.15. with Polycom VVX410 phones. I've got the commercial endpoint manager running. System is connected wtih Twilio trunks. I can't...
View ArticleIVR recording and then sending to voicemail
@aoberlin wrote: We have a client that has an existing NEC system that will let a caller call and go to an interactive prompt system. The system will ask the caller a question and they will give an...
View ArticleUpdate FreePBX from FreePBX 12.0.76.4
@axlpierola wrote: Hello everyone! I am trying to update my FreePBX 12.0.76.4 to use (Call History from UCP), I have been given this guide: wiki.freepbx.org/display/PPS/FreePBX-Distro-10.13.66 But I'm...
View ArticleInband DTMF detection not working
@mjurcev1 wrote: Installed FreePBX 13 (10.13.66-19). Telco provider uses alaw and inband DTMF.Log File Settings have DTMF logging enabled (ON) for both full and console.chan_sip is used for SIP...
View Article