Enable day wise CDR push on freepbx
@shuvo45 wrote: Hi,I'm using elastix free pbx. I have planned to intigrade a billing system with my PBX. I need to push CDRs to that billing system as day wise CDR file. Please help me with the...
View ArticleSite To Site Extension Dialing
@adamwitt201 wrote: We recently upgraded to FreePBX at one of our other sites. They are connected together through a VPN and the two systems are connected together with an IAX trunk. Extension to...
View ArticleIncoming Calls cannot hear me
@wspence wrote: Hey guys, I am having a weird issue where when someone calls me I can hear them but they cannot hear me. If i call them audio is fine both ways. the really weird thing is I had...
View ArticleFreePBX Distro stuck in "Create a free trial account"
@root525 wrote: Hi! When i open web interface of FreePBX, system show window of registration. In step 2 system show ERROR and nothing happening. All functions are disabled, i can't do nothing.Thank...
View ArticleDevelop Modules without using the MVC model
@mitterhuemer wrote: Hello,i try to develop a module for FreePBX but the Coding with the MVC Modell is really hard to understand for me. I already investigated a lot of time and do not come forward...
View ArticleSystem Admin PBX Firmware: 10.13.66-21 Update Problem
@lornolsen wrote: With system-admin I just applied the 10.13.66-21 update. My asterisk is now writing a 120mb dump every 30 seconds. Asterisk can not get started. Any ideas? I also applied the update...
View ArticleFreePBX 14 Distro SNG7 Install Fails on VM
@jerryriggin wrote: I downloaded and validated checksum on SNG7-FPBX-64bit-1706-1.iso, attempted install on VirtualBox VM configured for Redhat 64 with 4 cores and 8 Gigs RAM, 80G SATA HD. After 5...
View ArticleRouting question - I am confused
@bhubert1978 wrote: hi everybody, i have a question for routing traffic with two eth. eth3 is the public ip where my pbx is reachable over the internet. eth4 is in a separate network where my clients...
View ArticleQueue: Pause Reasons
@munozj wrote: I found this old post community.freepbx.org Pause queue member Hi, I'd like to give my agents the ability to set their phone to Lunch or Meeting but I'm not sure how to implement this...
View ArticleIAX troubleshooting again
@a5t1 wrote: I have one main freepbx system (SIP trunk only) (FreePBX 13.0.192.8) "system A" with an ip of 172.29.122.117 I have deployed a second freepbx system at another site, "system B" has an IP...
View ArticleStorage space is getting high on the following drives of your system:...
@marcm wrote: HelloI'm getting hourly email about disk usage. I can't find any /dev/mapper/SangomaVG-root on disk. System Admin Storage reports Software Mirror Raidsda OK sdb OK / 3%/boot 30% Any idea...
View ArticleAccess VM from alternate Extension without logging in?
@seemenc wrote: I'm using FreePBX 14.0.1.4I have 2 sip trunksI have 2 Obihai 1032 phonesI have Ext 300 and 301 on phone 1I have Ext 400 and 401 on phone 2Extensions 300 and 400 have no VM and...
View ArticleEcho cancellation ...again
@datazero wrote: Hi,i have an new installation of FreePBX distro 14 with Asterisk 13, a Sangoma A200 card (2FXS + 2FXO + HWEC) and Sangoma phone S500. When i make a call through the FXO lines...
View ArticleFreePBX Admin Gui Open SSL Port
@mitterhuemer wrote: I have a question about Security of FreePBX. It means "never ever make the FreePBX Admin Gui Accessible from outside" Is it possible to secure the SSL Web Admin with additional...
View ArticleIVR calling automatically based on a trigger (Escape Game)
@vincentcolignon wrote: Hi i'm building an escape game and i'd like to create an enigma with a phone and an IVR. Basically my guests should enter some values in the IVR (coordinates to destroy a...
View ArticleCall Event Log (CEL) download (How?)
@mrczr wrote: Hi! I'd like to ask you, how could i download the Call Event Log (not the call history log) from the server.I tried through the UCP on the 13 and the 14 version of Freepbx. I configured...
View Article2 Dongles on FreePBX
@matsyuf wrote: Hello, I have 2 dongles on my PBX (Dongle0 and Dongle1). I want to be able to receive inbound calls from Dongle0 and Out bound calls through Dongle1. At first I had Dongle0 and...
View ArticleTroubleshooting IAX2 trunks (stop arguing)
@a5t1 wrote: I'd really like to bring up the other thread of why SIP or IAX is better for trunking, however, I don't care. At the end of the day I'd like to have some meaningful discussion on why my...
View ArticleHow can I disable the call parking announcement?
@np_pyro wrote: Is there a way that we can disable the playback of the park extension over the voice channel when parking a call? We have a system where the users have requested that we disable this....
View ArticleRing group hangup after going to second extension
@asfree wrote: Hello,I am facing a strange issue with my freebx. Here is the situation : I call local number. Inbound send to the ring group 900. The ring group include 2 extensions. It's ring to...
View Article