Prevent cell phone voicemail from answering follow-me call (call forwarding)
@zxd33 wrote: Hey guys, I have an extension set-up that has follow-me to all other extensions including my cell phone. However, when going to my cellphone, if i decline the call or if the cell phone...
View ArticleSRPM availability
@matphillips wrote: The list of files available here: http://yum.freepbxdistro.org/pbx/SRPMS/asterisk/13/ seems to stop at Asterisk 13.18.3, but the currently running Asterisk version on a fresh...
View ArticleCustom voice ivr
@Raven5650 wrote: hello everyone, i succeed in creating a custom ivr that response to my digit using the extensions_custom.conf. now i wonder if i can do the same things but with voice input instead...
View ArticleMissed call Notification on Email
@hamidfareed wrote: I am running FreePBX 14.0.1.19 ‘VoIP Server’. I want that if there is a missed call, it should be notified by sending an email to predefined email address. How can it be possible?...
View ArticleHolidays and time conditions for multiple queues
@fabbobabbo wrote: I´m setting up FreePBX for our callcenter. We are moving away from 3CX. We currently have 80 customers, each with their own Inbound Route and Queue. I´m contemplating how to...
View ArticleMGCP Configuration with cisco 2921 Gateway
@CGHS_NetAdmin wrote: Working to replace a cisco CM (v9.4) system to FreePBX (v14.0.1.36 / Asterisk 15.1.5). Have several issues: Current trunks are MGCP that are part of a cisco 2921 gateway. Looking...
View ArticleHow to troubleshoot system crash?
@jcroy wrote: I was told our pbxact system went down (rebooting phones fixed it), is there a way that one can troubleshoot what occured so we can solve this problem and prevent this from occurring in...
View ArticleChanging chan sip default port 5060
@elascano wrote: I have searched everywhere online but i haven’t been able to fully understand this, hopefully one of you freepbx gurus can help me. Using hosted FreePBX 14.0.1.31 with asterisk 15 and...
View ArticleGet .Net Core default page after installing FreePBX 14 on Microsoft Azure...
@jyost wrote: I provisioned a Microsoft Azrue Centos 7 with .Net Core 2 and went through the FreePBX manual installation guide found here:...
View ArticleAsterisk does not hangup queue call from PSTN
@svchost1101 wrote: Hi. I have GXW4108 with FreePBX13.0.193 Gateway get 6 lines from PSTN and connected by pjsip trunks to asterisk. -> inbound rule to redirect all calls too queue -> 4 static...
View ArticleClik here to view.
FreePBX Distro 10.13.66-9 upgrade problem
@AndreyMasalov wrote: I’m upgrading to FreePBX Distro 10.13.66-22 and when I click Apply Config, I get the error message: Reload failed because retrieve_conf encountered an error: 255 exit: 255 Unable...
View ArticleChan_SIP unable to register on my PBX
@igor_stojanoski wrote: I cant understand what i`m doing wrong i want to create extension to have video calls on FreePBX v.14 installed from distro. The only error i get in cli is [2018-02-13...
View ArticleFatal error on fresh install
@svejaka wrote: Hello Im doing fresh install of FreePBX 14 on Linux Mint 18.3 with running Asterisk 15.2.0 I got the system up, opened the browse, created admin account and when I logged in Ive got...
View ArticleClik here to view.
FreePBX web interface is down
@jeffr wrote: Our phone system went down over the weekend and wouldn’t boot up without us doing a fsck and repairing some files. We’re working on getting a backup server in case this one goes down…but...
View ArticleCan't upgrade userman 1146 Table 'asterisk.userman_directories' doesn't exist
@Negative wrote: I’m trying to update and User Management cannot upgrade and gives out the following: SQLSTATE[42S02]: Base table or view not found: 1146 Table ‘asterisk.userman_directories’ doesn’t...
View ArticleVoip + local pbx on same phone
@qbadat wrote: Hi, Sorry my first post and new to freepbx. I successfully registered my yealink T23g phone to our 8x8 voip service. Same phone was working fine using our local on premise freepbx for...
View ArticleVAD on FreePBX
@SamSanders wrote: I have been having a problem with T-Mobile calls drop after 20 sec of voice-mail. My sip trunk provider COX talked with them about it. Net result T-Mobile want me to enable some...
View ArticleHardware compatibility list for FreePBX 14 (SNG 7)
@phedrich wrote: Is there a hardware compatibility list for FreePBX 14 (SNG 7)? I have older hardware, and when installed FreePBX 14 did not identify my NIC, the same NIC the install had been using to...
View ArticleUpgrade FreePBX v13 to v14 error
@Jaspers05 wrote: Hi, Yesterday I tried upgrading my FreePBX v13 to v14. I got stuck at the error below. Whatever I try, I can’t get it to work. Anyone an idea? In Self_Helper.class.php line 213: _...
View ArticleTrunk is empty after saving incoming trunk with "Register String"
@hotshot wrote: Hi members Since around beginning of this week, we have the problem, that after we save the “Register String” and “USER Details”, the Web-GUI let them empty after Submit and Apply....
View Article