Outbound calls not rolling
@jmmicmc wrote: I was wondering whether someone could give me some ideas. We have a Freepbx system (framework: 13.0.88.11, Asterisk: 12.12.2), with two POT lines coming in. We have with the following...
View ArticleFirewall monitoring daemon in infinite loop
@Ollie wrote: Getting the following from cli repeatedly: Broadcast message from root@xxxx.xxxxx.com (Fri Apr 27 12:47:20 2018): Loop detected in monitoring script. Dying! matching entries in...
View ArticleLoaded 64bit, Restored Backup, Outbound calls not working
@JessicaRabbit wrote: distro version 13-32bit/64bit After installing 64bit distro and restoring PBX Settings from 32bit installation, incoming calls work but outgoing do not. Outbound routes look ok...
View ArticleXMPP server in FreePBX Distro - how to make it listen on IPv4?
@vesperbot wrote: We have decided to try employing FreePBX’s module “XMPP server” for intra-org instant messaging, and have found out that it does not listen on port 5222/tcp, but listens on...
View ArticleCall recordings mount 2nd hard drive?
@steve_pbuk wrote: I set a FreePBX server up with 20gb Hard Drive (mainly for testing) and now I want to add a 2nd hard drive and use this for call recordings. Do you recommend adding the hard drive...
View ArticleUnable to internal routing (to ext) based upon called ID by customer
@adminpbx wrote: Dear all my issue is very simple but I am unable to fix. I have a callcentric account and our offices have USA/UK/AUS numbers for customers i.e. people in USA call on our USA number,...
View ArticleMoving from 32bit to 64bit to v14 appears successful
@JessicaRabbit wrote: What worked for me: Created full disk image backup of 32bit v13 Created final FPBX full backup to FTP server (remember the FTP config). Installed 64bit v13 Distro, brought up to...
View ArticleDropping Inbound calls only after 7 Seconds
@wesleyg05 wrote: Freepbx newbie. I am dropping inbound calls from Broadvoice. All outbound calls work fine. I have looked over everything and can not seem to find an issue. Posts: 8 Participants: 2...
View ArticleClik here to view.
Tel.t-online.de timeout
@VoipTom wrote: Hello, I can’t register the sip trunks (chan_sip or chan_pjsip). I get the error: NOTICE[2152] chan_sip.c: – Registration for ‘0xxxxxxxxx@tel.t-online.de’ timed out, trying again...
View ArticleIVR transfer without waiting to enter option
@smsfabio wrote: Hello, I’m setting up the IVR. however I would like to add the option that, when the client does not type anything, it even then routes to an extension. What do I have to type in...
View ArticleIVR not waiting for 3 digits extension - goes right through the IVR selector
@MacsOffice wrote: I have the IVR all set with options 1 - 8. The extensions are all 2xx (3 digits) . All seems fine to me. I cant seem to get the delay right to reproduce this, but the complaint I...
View ArticleMysterious calls from non-existent extension
@RKFAULHABER wrote: Hi, One of our remote VOIP phones is suddenly getting multiple calls from extensions that do not exist. On the user’s phone it will list extensions like “100”, “101”, “1000”,...
View ArticleFreePBX 14 Google Voice Oauth 2 not connecting
@leegreen01 wrote: I am trying to register a google voice account via oauth 2 and it always shows as disconnected if i use plain text it works fine. The error i see is below [2018-05-02 18:56:17]...
View ArticleProblem on make config
@davidbqzt wrote: Hi, I have to install FreePBX on some kind of VPS or “CloudServer”, that server has CentOS 6.9, I have noted some particularities, but I can’t do nothing about it, is the server that...
View ArticleAutomatically migrate certificate from another server
@chemnic wrote: Probably the title is wrong, but here I try to explain my problem: I want my users to access UCP with WebRTC enabled and working. I know that for that to happen I need a certificate...
View ArticleLook up extension on handset?
@snaplink wrote: Current PBX Version 14.0.2.14 PBX Firmware: 12.7.4-1804-1.sng7 PBX Service Pack: 1.0.0.0 I have a successful implementation of FreePBX up and running for a couple weeks now and one...
View ArticleHour-plus-long voicemails / CDR usage
@PCS wrote: Hi all, We’ve had several occurrences of hour-plus-long voicemails being left for users on various systems. The most recent was on a FreePBX 12.0.76.2. In the Voicemail admin, there were...
View ArticleFreepbx + chat
@damania wrote: All I’m trying to do is get sms/IM/txt/chat to work on Bria or Zoiper softphones but I have been unsuccessful in putting together an elegant solution. Yes, XMPP (by adding two accounts...
View ArticleConnecting remote phones to PBX that's on LAN and configuring phones outside...
@sp9 wrote: I’m in the process of ‘playing’ and learning about FreePBX. I’m new to phone systems in general. So far, I’ve got FreePBX installed and I have 2 Cisco SPA 504G phones to use. I went ahead...
View ArticleClik here to view.
Unable to connect to the UCP Node Server because: 'Error: xhr poll error
@Gsmitt wrote: Hello all, I’m have troubles with my User control panel. Error” Unable to connect to the UCP Node Server because: ‘Error: xhr poll error’ 001-freepbx-ucp.png1368x487 15.9 KB My...
View Article